Receptacle (Vertical Shown)
Electrically Hot
To create a unique configuration for MULTI-BEAM connectors simply complete this worksheet and forward it to your Tyco Electronics sales engineer.
PCB-Mount Cable-Mount
Slide-to-Lock
XYZ Floating
Plugs
Squeeze-to-
Release
XYZ Floating
1. Performance Grade MULTI-BEAM XL Connector MULTI-BEAM XLE Connector
2. Application Board-to-Board Cable-to-Board
3. Gender Plug (Male) Receptacle (Female)
4. Orientation Cable Only Blind-Mate specify Floating or Slide-to-Lock Receptacle Latching
PCB Only Right-Angle Vertical
5. Termination (Cable Only) Power 8 AWG 10 AWG 12 AWG 14 AWG
Signal 22 AWG 24 AWG 26 AWG
6. Termination Style (PCB Only) Solder Tail .135′′ [3.43 mm] Press-Fit .120′′ [3.05 mm]
Solder Tail .165
′′ [4.19 mm] Press-Fit .135′′ [3.43 mm]
Press-Fit .165
′′ [4.19 mm]
7. Mounting to PCB Hold Downs (one on either end)
.122
′′ [3.10 mm] Mounting holes (Accepts #4 screws, right-angle connectors only)
.150
′′ [3.81 mm] Mounting holes (Accepts #6 screws, right-angle connectors only)
8. Select # of Contacts ___ Enter Power Contact Type (LP - Low Power, HP - High Power)
Section A: (Power Contacts) ___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the position(s) to be loaded with Pre-mate contact (Receptacles only)
(Mate-First-Break-Last) ( i.e. #1,#3, etc.)
Contact Centerline Spacings: .200
′′ [5.08 mm] (for High Power only)
.250
′′ [6.35 mm] (for High Power only)
.300
′′ [7.62 mm] (for High Power only)
Section B: (Signal Contacts) ___ Enter # of Signal Contacts (Multiples of 8 are standard, i.e. 16, 24, 32...)
___ Enter the positions with Post-Mate Contacts (Mate-Last-Break-First, Plugs only)
Note: Row A is standard (i.e. A1, A3, etc.)
Section C: (Power Contacts) ___ Enter Power Contact Type (LP - Low Power, HP - High Power)
___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the positions to be loaded with Pre-Mate Contacts (Receptacles only)
(Mate-First-Break-Last, i.e. #1, #3, etc.)
Contact Centerline Spacings: .200
′′ [5.08 mm] (HDP) .250′′ [6.35 mm] (P) .300′′ [7.62 mm](ACP)
9. Additional Requirements
10. Customer Information
Name: __________________________ Company: ____________________ Location: ________________________
Phone: __________________________ Fax: __________________________________ e-mail:_________________________
(Submit to your local Tyco Electronics Sales Engineer)
MULTI-BEAM XL, MULTI-BEAM XLE, TE (logo) and TYCO ELECTRONICS are
trademarks of the Tyco Electronics group of companies and its licensors.
