Board-to-Board Products
26
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Plug Assemblies
The newest addition to the
MULTI-BEAM XL cable
assemblies are the cable
mounted plugs. Produced
with modular molds, the
connectors can be made
in a wide variety of sizes.
The PCB mounted
MULTI-BEAM XL plugs are
typically rigidly mounted
to hot-swappable power
supplies and the systems
they connect with. The
“float blind-mate drawer
connector” design of the
MULTI-BEAM XL cable
connectors helps eliminate
the concern of an inade-
quately aligned chassis.
The connector can accept
mating parts misaligned
by as much as 3 mm
(± 1.5 mm), and still mate
without applying stress
to solder or complaint
pin terminations. The
MULTI-BEAM cable plugs
can terminate 8-14 AWG
and 22-26 AWG wires all
in one connector, without
using adapter circuit
boards. The use of high
temperature glass filled
housing materials, redun-
dant contact retention and
high conductivity contact
materials allows the use of
this connector in very high
density applications.
The cable assemblies
are all RoHS compliant
designed to specific
customer requirements
and manufactured in
Tyco Electronics’ internal
cable assembly manufac-
turing facilities.
Technical Documents
Product Specification
108-2157-1
Application Specification
114-13164
For More Information
Internet
http://tycoelectronics.com
Check out product
information at:
http://mbxl.tycoelectronics.com
Technical Support Center
1-800-522-6752
Cable Plug Assemblies
Product Facts
■ High strength housing
materials
■ Hot-Pluggable
■ Installation provides float in
X, Y and Z directions
■ Sequenced mating
■ RoHS complaint
■ Modular mold design
provides configuration
flexibility
■ Integral cable clamp
supports contacts and
provides strain relief in
minimum amount of space
■ 30 microinch (0.76
micrometers) gold plated
contacts for high reliability
■ Sold only as part of a
pre-assembled cable
assembly
