Board-to-Board Products
19
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies
MULTI-BEAM XL Cable
Assemblies allow designers
freedom to connect power
supplies and power
distribution subassemblies
in a wide variety of
applications. Expanding
beyond board-to-board
applications the cable
assemblies are available for
both cable-to-board or
panel-mount applications
and can terminate 8-16
AWG and 22-26 AWG wires
all in one connector, without
using adapter circuit
boards. In addition, the
power contacts are
designed to be able to
accept two-wire terminations
which can further reduce
harness complexity by
reducing or eliminating
mid-wire splices.
The use of high temperature
glass filled housing materials,
redundant contact retention
and high conductivity
contact materials allows
the use of this connector in
very high current density
applications. The features
work together to result in a
highly durable and compact
power connector, which
offers industry leading
minimum millivolt drop
through the connection. The
connector was designed to
pass the UL 1977 and IEC
60950 finger probe test
which makes the connector
touch-safe. The insulation
crimp adds further safety
by keeping the insulation
from being pulled away
from the termination point.
These features eliminate the
need for a secondary cable
clamp which often can be
size prohibitive.
The cable connectors
are designed to mate to
the de-facto standard
Tyco Electronics
MULTI-BEAM XL right-angle
or vertical PCB plugs. The
combination of PCB and
cable connections, both
with mixed power
and signal arrangements
provides a universal power
distribution connector
systems.
The cable assemblies are
all RoHS compliant,
designed to specific
customer requirements
and manufactured in
Tyco Electronics’ cable
assembly manufacturing
facilities.
Cable Receptacle
Assemblies
Product Facts
■
Single one-piece housing
design
■
Terminal Position
Assurance (TPA) Secondary
Locks on contacts help
prevent contact back-out
■
Pre-assembled made-to-
order cable assemblies
■
Installation to panel
provides float in X, Y and Z
directions
■
Insulation crimp on all
contacts
■
30 microinch (.76 micro-
meters) gold plated
contacts for high reliability
■
Touch-safe design passes
UL1977 and IEC 60950
finger probe test
■
AC and DC power in the
same connector —
meets UL & IEC safety
requirements
■
All MULTI-BEAM XL
products in this section are
RoHS compliant
Technical Documents
Product Specification
108-2157
Application Specification
114-13112
For More Information
Internet http://tycoelectronics.com
Check out product information at: http://mbxl.tycoelectronics.com
Technical Support Center 1-800-522-6752
