14
HEAT SINKS FOR IC PACKAGES
EUROPE
ASIA
Italy Tel: +39 051 764011 email: sales.it@aavid.com
United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com
Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg
Taiwan Tel: +886(2) 2698-9888 email: sales@aavid.com.tw
AMERICA
USA Tel: +1 (603) 224-9988 email: info@aavid.com
www.aavidthermalloy.com
ORDERING INFORMATION
Push pin attachment
Push pin heat sinks require two 3.10mm holes in the circuit card
to quickly attach the heat sink over the device.The one piece
design makes assembly a snap. Pressure is maintained by the
tension of the push pin coil springs to ensure even pressure
across the device. Push pins provide a greater margin of reliabil-
ity in applications where gravity or vibration may cause tapes or
adhesives to fail.The addition of a phase change pad optimizes
thermal performance.
IC Pkg. Size (mm) Part Number “W” (mm) “L” (mm) “H” (mm) “S” (mm) “T” (mm) θn
2
θf
3
Finish Fig. PCB Fig.
1
Pin Style Pad
28 x 28 10-6326-27G 28.00 28.00 6.00 46.60 6.50 44.10 13.13 Black anodize 1 A Plastic Yes
28 x 28 10-6326-28G 28.00 28.00 6.00 46.60 6.50 44.10 13.13 Black anodize 1 A Brass Yes
28 x 28 10-6327-01G 28.50 28.50 10.00 46.60 7.00 30.60 9.26 Black anodize 2 A Plastic No
35 x 35 10-TNT2-01G 36.10 48.00 11.60 6.50 18.80 6.13 Black anodize 3 D Plastic No
37.5 x 37.5 10-5597-02G 37.40 37.40 6.00 59.00 6.50 33.30 9.91 Green anodize 5 B Plastic No
37.5 x 37.5 10-5597-22G 37.40 37.40 6.00 59.00 6.50 33.30 9.91 Gold anodize 5 B Plastic Yes
37.5 x 37.5 10-5597-33G 37.40 37.40 6.00 59.00 6.50 33.30 9.91 Gold anodize 5 B Brass Yes
37.5 x 37.5 10-5607-04G 37.40 37.40 10.00 59.00 7.00 22.10 6.99 Black anodize 5 B Plastic Yes
37.5 x 37.5 10-5607-05G 37.40 37.40 10.00 59.00 7.00 22.10 6.99 Black anodize 5 B Brass Yes
37.5 x 37.5 372924M02000G 37.40 37.40 6.00 59.00 6.50 32.60 9.91 Green anodize 5 B Plastic No
45 x 45 10-L4LB-03G 45.20 41.40 11.89 58.80 8.00 16.70 5.60 Black anodize 4 C Plastic Yes
45 x 45 10-L4LB-05G 45.20 41.40 11.89 58.80 8.00 16.70 5.60 Black anodize 4 C Brass Yes
45 x 45 10-L4LB-11G 45.20 41.40 11.70 58.80 8.00 14.20 4.91 Black anodize 4 C Plastic No
BGA–Push Pin Attachment
1. Push pin mechanical drawings and board mounting drawings see page 15
2. Natural convection thermal resistance based on a 75° C heat sink temperature rise.
3. Forced convection thermal resistance based on an entering 1.0 m/s (200LFM) airflow.