DATASHEET | DECEMBER 2011
FIBER OPTICS
| REV 2011.12
Information contained herein is deemed reliable and accurate as
of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
General and Mechanical Specifications
(continued)
Property Requirement Comments
Front Panel RF Gain / OMI
Adjustment Range
+2 / -4 dB from nominal setting CATV Performance can vary slightly
CATV Frequency Range 45MHz – 1003 MHz
CATV Flatness +/- 0.50 dB 45MHz - 550MHz
+/- 0.75 dB 45MHz – 1003 MHz
CATV Flatness – N-Type +/- 0.75 dB 45MHz – 1003 MHz N-Type
CATV Input impedance
75
CATV Input Return Loss 16dB min 45MHz – 1003 MHz
CATV Front Panel RF Tap -20 +/- 1 dB down from RF input
CATV Front Panel RF Tap Flatness +/- 1 dB 45MHz – 1003 MHz
SAT-IF Frequency Range 950MHz – 2800 MHz
SAT-IF Flatness +/- 2 dB
SAT-IF Input impedance
75
SAT-IF Input Return Loss 10dB min 950MHz – 2800 MHz
SAT-IF Front Panel RF Tap 7 +/- 2.5 dBmV/Ch at 1% OMI/ch
SAT-IF Front Panel RF Tap Flatness +/- 1 dB 950MHz – 2800 MHz
Test/Link Configuration
Property EDFA Link
1
Received Power
2
L-Type 15 dBm 25 Km 0.0 dBm at the receiver
D-Type None 40 Km 0.0 dBm at the receiver
S-Type 16 dBm 65 Km 0.0 dBm at the receiver
H-Type 18 dBm 80 Km 0.0 dBm at the receiver
F-Type 21 dBm 20 Km -5.5 dBm at the receiver
N-Type 13 dBm 40 Km 0.0 dBm at the receiver
Medallion 6000 Series 1550 nm
Externally Modulated Transmitter