DATASHEET | DECEMBER 2011
FIBER OPTICS
| REV 2011.12
Information contained herein is deemed reliable and accurate as
of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
H-type
Property Units Models Comments
Performance (Note 1-7) 6000-H01 6000-H02
Specified Link Length L (km) 80 80
Channel Plan NTSC 80-Ch PAL 60-Ch
Optical Output Power Po (dBm) 7.0/ 7.0 7.0/ 7.0 Min.
Noise Bandwidth BW (MHz) 4 5
SBS Suppression (dBm) 18.0 18.0 Min.
Carrier to Noise Ratio CNR (dB) 52.0/ 52.0 52.0/ 52.0 Min.
Composite Second Order CSO (dBc) -65/ -65 -65/ -65 Max.
Composite Triple Beat CTB (dBc) -65 -65
Max. @ +25C
Composite Triple Beat CTB (dBc) -64 -64 Max. @ 0
o
C to 50
o
C
F-type
Property Units Models Comments
Performance (Note 1-7) 6000-F01 6000-F02 6000-F03 6000-F04
Specified Link Length L (km) 20 20 20 20
Channel Plan NTSC 80-Ch PAL 60-Ch NTSC 110-ch PAL 89-Ch
Optical Output Power Po (dBm) 7.0/ 7.0 7.0/ 7.0 7.0/ 7.0 7.0/ 7.0 Min.
Noise Bandwidth BW (MHz) 4 5 4 5
SBS Suppression (dBm) 21.0 21.0 21.0 21.0 Min.
Carrier to Noise Ratio CNR (dB) 48.0 48.0 45.0 45.0 Min.
Composite Second Order CSO (dBc) -58 -58 -58 -58 Max.
Composite Triple Beat CTB (dBc) -58 -58 -58 -58 Max.
N-type
Property Units Models Comments
Performance (Note 1-7) 6000-N01 6000-N02
Specified Link Length L (km) 40 40
Channel Plan NTSC 80-Ch PAL 60-Ch
Optical Output Power Po (dBm) 9.5 9.5 Min.
Noise Bandwidth BW (MHz) 4 5
SBS Suppression (dBm) 13.0 13.0 Min.
Carrier to Noise Ratio CNR (dB) 52.0 52.0 Min.
Composite Second Order CSO (dBc) -62 -62 Max.
Composite Triple Beat CTB (dBc) -62 -62
Max. @ +25C
Composite Triple Beat CTB (dBc) -61 -61 Max. @ 0
o
C to 50
o
C
Notes:
1. Unless stated otherwise all specifications apply over full temperature range with no digital loading.
2. Unless stated otherwise specifications apply for nominal RF input level as defined below, after a 30 minute
stabilization period.
3. Specifications separated by a slash are port1 / port 2.
4. Units are tested per the Test / Link Configuration Table
5. Noise figure for the EDFA = 4.5 ~ 5.5 dB
6. Corning SMF-28 single mode fiber
7. Receiver responsivity is 0.95 mA/mW, Equivalent noise current is 7 pA/(Hz)1/2
8. With 36 QPSK modulated SAT-IF signals between 950 … 2800 MHz. 27 MHz IF bandwidth
Medallion 6000 Series 1550 nm
Externally Modulated Transmitter
