• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • 5962G8957701QZC PDF文件及第17页内容在线浏览

5962G8957701QZC

5962G8957701QZC首页预览图
型号: 5962G8957701QZC
PDF文件:
  • 5962G8957701QZC PDF文件
  • 5962G8957701QZC PDF在线浏览
功能描述: BCRTM
PDF文件大小: 2024.39 Kbytes
PDF页数: 共61页
制造商: ETC1[List of Unclassifed Manufacturers]
制造商LOGO: ETC1[List of Unclassifed Manufacturers] LOGO
制造商网址:
捡单宝5962G8957701QZC
PDF页面索引
120%
BCRTM-17
#13 RT Timer Reset Register (Write Only)
Any write (i.e., data = don’t care) to this register’s address location resets the RT Time Tag timer to zero.
The BCRTM’s Remote Terminal Timer time-tags message transactions. The time tag is generated from a free-running eight-
bit timer of 64µs resolution. This timer can be reset to zero simply by writing to Register 13. When the timer is reset, it
immediately starts running.
#14 Activity Status/Operational Mode Register
BIT 15 Bus Monitor Select. This bit should be cleared for RT mode operation. The host sets this bit to enable the
BCRTM’s Monitor mode of operation. Bit 10 of Register 0 must also be "0" to enable the Monitor mode.
BIT 14 Monitor All Terminals. When this bit is set, the BCRTM monitors all remote terminal activity.If this bit is not set,
then bit 13 must be set. This bit should be cleared for RT Mode operation.
BIT 13 Monitor Declared Terminals. When this bit is set, the BCRTM monitors all remote terminal bus activity. If this
bit is not set, then bit 13 must be set.This bit should be cleared for RT mode operation.
BITs 12-0 Reserved
#15 Reserved Register
This register is reserved for BCRTM use only and the host should not access it.
#16 Monitor Selected Remote Terminal Address 15-0
BITs 15-0 Monitor Selected Remote Terminal Addresses 15-0. By setting the appropriate bit in this register, the host can
determine which or the Remote terminals, from RT 0 through RT 15, the BCRTM will monitor. For example,
by setting bit 5 in this register, the host instructs the BCRTM to only monitor the bus activity for remote terminal
5. These bits are not mutually exclusive, therefore, the host can monitor any number of different remote terminals
by selecting the proper combination of bits.
#17 Monitor Selected Remote Terminal Address 31-16
BITs 15-0 Monitor Selected Remote Terminal Addresses 31-16. By setting the appropriate bit in this register, the host can
determine which or the Remote terminals, from RT 16 through RT 31, the BCRTM will monitor. For example,
by setting bit 21 in this register, the host instructs the BCRTM to only monitor the bus activity for remote terminal
21. These bits are not mutually exclusive, therefore, the host can monitor any number of different remote
terminals by selecting the proper combination of bits on this register and Register 16.
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价