04-2015, Rev. 0415
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
SCHRACK
General Purpose Relays
Industrial Relays
Power Relay RM 2/3/7
(Continued)
Other Data RM2 RM3 RM7
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
for mounting/handling -20 to 40°C
in operation
DC coil -40 to 70°C -40 to 70°C -40 to 60°C
AC coil -40 to 60°C -40 to 55°C -40 to 50°C
Cold storage, IEC 60068-2-1 16h/-40°C
Dry heat, IEC 60068-2-2 16h/+85°C
Damp heat cyclic , IEC 60068-2-30, Db, Variant 1 12/12h +25/+55°C
Category of environmental protection
IEC 61810 RTI - dust protected
Vibration resistance (functional)
form A (NO)/form B (NC) 5/2g 5/2g 12/4g
Terminal type PCB-THT, plug-in,
quick-connect
Cover retention, pull/push force 100/100N
Weight 81g
Resistance to soldering heat THT
IEC 60068-2-20 270°C/10s
Packaging unit 10/25 pcs.
Accessories
For details see datasheet Accessories Power Relay RM
Note: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
Coil Data (continued)
Coil versions, AC coil
Coil code Rated Operate Release Coil Rated coil
STD LED voltage voltage voltage resistance power
50/60Hz 50/60Hz 50/60Hz
VAC VAC VAC Ω±10%
1)2)
VA
Coil versions, AC-coil, RM2, RM3
506 R06 6 4.8/5.1 1.8 5.3 2.29/1.98
512 R12 12 9.6/10.2 3.6 24 2.19/1.86
524 R24 24 19.2/20.4 7.2 86 2.26/ 1.95
548 R48 48 38.4/40.8 14.4 345 2.28/1.97
560 R60 60 48.0/51.0 18.0 544 2.27/1.96
615 S15 115 92.0/97.8 34.5 2000 2.37/2.00
730 T30 230 184.0/195.5 69.0 8300
1)
2.32/ 1.96
900 V00 400 320.0/340.0 120.0 27500
2)
2.31/1.96
Coil versions, AC-coil, RM7
506 R06 6 4.8/5.1 1.8 4.7 2.86/2.36
512 R12 12 9.6/10.2 3.6 19.5 2.71/2.27
524 R24 24 19.2/20.4 7.2 80 2.62/2.00
548 R48 48 38.4/40.8 14.4 320 2.60/2.17
560 R60 60 48.0/51.0 18.0 500 2.62/2.20
615 S15 115 92.0/97.8 34.5 1850 2.65/2.22
730 T30 230 184.0/195.5 69.0 7500 2.69/ 2.26
900 V00 400 320.0/340.0 120.0 23500
2)
2.61/2.20
1)
Coil resistance ±12%,
2)
Coil resistance ±15%
All figures are given for coil without pre-energization, at ambient temperature +23°C
Insulation Data RM2 RM3 RM7
Initial dielectric strength
between open contacts 1500Vrms 1500Vrms 1500Vrms
between contact and coil 2500Vrms 2500Vrms 2500Vrms
between adjacent contacts 2500Vrms 2500Vrms 2500Vrms
Initial surge withstand voltage
between contact and coil 5000V 4000V 4000V
Clearance/creepage
between contact and coil ≥4.0/14.9mm
between adjacent contacts ≥6.1/7.3mm
Material group of insulation parts IIIa
PCB layout / terminal assignment
Bottom view on pins
3 form C (CO) contacts
2 form C (CO) contacts
S0269-AA
S0269-AB
S0269-AD