269
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mini-Tandem Spring Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mini-Tandem
Spring Housings
5
Receptacle Contacts
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating C — Duplex plated .000050
[0.00127] over matte tin in contact area,
over .000030 [0.00076] nickel on entire
contact
Plating D — .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
.060
[1.52]
.085
[2.15]
Min.
Contact
Area with
Gold Inlay
.060
[1.52]
Low Pressure Contacts
Miniature Applicator for
Wire Size Range
Ins. Dia.
Contact Part No.
Applicator for AMP-O-MATIC
AWG mm
2
Range
Finish
Strip Form Loose Piece
AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
26-22 0.14-0.32
0.36-0.54
Plating A 5531216-3 5531216-4
466819-2 466943-1
[0.64-1.37]
Plating B 5531216-1 5531216-2
Standard Pressure Contacts
Miniature Applicator for
Wire Size Range
Ins. Dia.
Contact Part No.
Applicator for AMP-O-MATIC
AWG mm
2
Range
Finish
Strip Form Loose Piece
AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
.025-.054
Plating B 530901-2 530901-3
32-28 0.03-0.08
[0.64-1.37]
Plating C 5530901-6 5530901-7 466723-1 466952-1
Plating D 5530901-4 5530901-5
.036-.054
Plating B 5530553-4 —
26-22 0.14-0.32
[0.91-1.37]
Plating C 5530553-6 — 466819-2 466943-1
Plating D 5530553-2 —
High Pressure Contacts
Miniature Applicator for
Wire Size Range
Ins. Dia.
Contact Part No.
Applicator for AMP-O-MATIC
AWG mm
2
Range
Finish
Strip Form Loose Piece
AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
32-28 0.03-0.08
.025-.054
Plating B 5531225-6 — 466723-1 466952-1
[0.64-1.37]
26-22 0.14-0.32
.036-.054
Plating B 5531224-6 — 466819-2 466943-1
[0.91-1.37]
*For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.