222
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Short Point Crimp Snap-In Receptacle Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Short Point Contacts
5
.068
[1.73]
CC
.060
[1.52]
.460
[11.68]
Section C - C
.012
[0.30]
Gap
Quick-Change
Wire Size
Applicator for
Applicator for
Range
Ins.
Finish
Contact Part No.
AMP-O-MATIC
Hand
AWG [mm
2
]
Dia. (Standard Pressure)
AMP-O-LECTRIC Stripper/Crimper
Tool
Range
Strip Form Loose Piece
Machine* Machine
Nos.
Plating A 1-104481-1 1-104481-3
32-28 0.03-0.08 .025-.060 [0.64-1.52] Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
.
Plating A 1-104480-3 1-104480-6
26-22 0.13-0.3 .025-.060 [0.64-1.52] Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
.
Plating A 1-104479-0 1-104479-3
24-20 0.2-0.5 .025-.060 [0.64-1.52] Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for par t nos. o f applicators for use with the Model “G”
machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
Extraction/Lance Reset
Tool No. 843477-1
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
page 270-272
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
