183
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
AMPMODU Interconnection System
Vertical Mount,
Receptacle Assemblies
5
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Closed Dual Entry, Side and
End Stackable Low Profile,
.100 x .100 [2.54 x 2.54]
Centerline, .150 [3.81] Tine
Spacing
.100±.003
[2.54±0.08]
.245
[6.22]
Ty p.
.020
[0.51]
Ty p.
(Standoffs)
A
.198
[5.03]
.050
[1.27]
Max.
Ty p.
.150
[3.81]
Ty p.
.130±.010
[3.30±0.25]
Ty p.
.148
[3.77]
Ty p.
Point of
Contact
.107
[2.72]
Ty p.
(Localized Gold
Plate Area)
No. of
Dimensions Contact Plating/Part Nos.
Pos.
A B Plating A Plating B Plating C
2 .100 [2.54] — 5-535542-1 5-147095-1 5-147096-1
4 .200 [5.08] .100 [2.54] 5-535542-2 5-147095-2 5-147096-2
6 .300 [7.62] .200 [5.08] 5-535542-3 5-147095-3 5-147096-3
8 .400 [10.16] .300 [7.62] 5-535542-4 5-147095-4 5-147096-4
10 .500 [12.70] .400 [10.16] 5-535542-5 5-147095-5 5-147096-5
12 .600 [15.24] .500 [12.70] 5-535542-6 5-147095-6 5-147096-6
14 .700 [17.78] .600 [15.24] 5-535542-7 5-147095-7 5-147096-7
16 .800 [20.32] .700 [17.78] 5-535542-8 5-147095-8 5-147096-8
18 .900 [22.86] .800 [20.32] 5-535542-9 5-147095-9 5-147096-9
20 1.000 [25.40] .900 [22.86] 6-535542-0 6-147095-0 6-147096-0
22 1.100 [27.94] 1.000 [25.40] 6-535542-1 6-147095-1 6-147096-1
24 1.200 [30.48] 1.100 [27.94] 6-535542-2 6-147095-2 6-147096-2
26 1.300 [33.02] 1.200 [30.48] 6-535542-3 6-147095-3 6-147096-3
28 1.400 [35.56] 1.300 [33.02] 6-535542-4 6-147095-4 6-147096-4
30 1.500 [38.10] 1.400 [35.56] 6-535542-5 6-147095-5 6-147096-5
32 1.600 [40.64] 1.500 [38.10] 6-535542-6 6-147095-6 6-147096-6
34 1.700 [43.18] 1.600 [40.64] 6-535542-7 6-147095-7 6-147096-7
36 1.800 [45.72] 1.700 [43.18] 6-535542-8 6-147095-8 6-147096-8
38 1.900 [48.26] 1.800 [45.72] 6-535542-9 6-147095-9 6-147096-9
40 2.000 [50.80] 1.900 [48.26] 7-535542-0 7-147095-0 7-147096-0
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bot-
tom entry application.
.100
[2.54]
.100*
[2.54]
Ty p.
.100
[2.54]
Ty p.
B
Recommended PC Board Hole Layout
for Bottom Entry or Pass Through Applications
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Recommended PC Board Hole Layout
for Top Entry
.035±.003
[0.89±0.08]
Dia. Typ.
B
Dia.
Ty p.
.075
+.005
.060
-.000
1.90
+0.13
-
0.00
[
]
.100
[2.54]
Ty p.
.150
[3.81]
Ty p.
Note: All part numbers are RoHS
compliant.
