205
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Accessories: Snap-In Polarizer for Low Profile Headers
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Printed Circuit Board
Connectors
5
Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
Note: For Post Shunts, contact Tyco Electronics.
.335
[8.51]
.134
[3.40]
.335
[8.51]
.134
[3.40]
Break Line
(See below.)
Break Line
(See below.)
Break Line