2-141
68 PLCC
XC3020
XC3030 XC3020 XC3030, XC3042 84 PLCC 84 PGA
10 10
PWRDN 12 B2
11 11 TCLKIN-I/O 13 C2
12 — I/O* 14 B1
13 12 I/O 15 C1
14 13 I/O 16 D2
— — I/O 17 D1
15 14 I/O 18 E3
16 15 I/O 19 E2
— 16 I/O 20 E1
17 17 I/O 21 F2
18 18 VCC 22 F3
19 19 I/O 23 G3
— — I/O 24 G1
20 20 I/O 25 G2
— 21 I/O 26 F1
21 22 I/O 27 H1
22 — I/O 28 H2
23 23 I/O 29 J1
24 24 I/O 30 K1
25 25 M1-
RDATA 31 J2
26 26 M0-RTRIG 32 L1
27 27 M2-I/O 33 K2
28 28 HDC-I/O 34 K3
29 29 I/O 35 L2
30 30
LDC-I/O 36 L3
— 31 I/O 37 K4
— I/O
* 38 L4
31 32 I/O 39 J5
32 33 I/O 40 K5
33 — I/O* 41 L5
34 34
INIT-I/O 42 K6
35 35 GND 43 J6
36 36 I/O 44 J7
37 37 I/O 45 L7
38 38 I/O 46 K7
39 39 I/O 47 L6
— 40 I/O 48 L8
— 41 I/O 49 K8
40 I/O* 50 L9
41 I/O* 51 L10
42 42 I/O 52 K9
43 43 XTL2(IN)-I/O 53 L11
68 PLCC
XC3030 XC3020
XC3020 XC3030, XC3042 84 PLCC 84 PGA
44
RESET 54 K10
45 DONE-
PG 55 J10
46 D7-I/O 56 K11
47 XTL1(OUT)-BCLKIN-I/O 57 J11
48 D6-I/O 58 H10
— I/O 59 H11
49 D5-I/O 60 F10
50
CS0-I/O 61 G10
51 D4-I/O 62 G11
— I/O 63 G9
52 VCC 64 F9
53 D3-I/O 65 F11
54
CS1-I/O 66 E11
55 D2-I/O 67 E10
— I/O 68 E9
— I/O* 69 D11
56 D1-I/O 70 D10
57 RDY/
BUSY-RCLK-I/O 71 C11
58 D0-DIN-I/O 72 B11
59 DOUT-I/O 73 C10
60 CCLK 74 A11
61 A0-
WS-I/O 75 B10
62 A1-CS2-I/O 76 B9
63 A2-I/O 77 A10
64 A3-I/O 78 A9
— I/O* 79 B8
— I/O* 80 A8
65 A15-I/O 81 B6
66 A4-I/O 82 B7
67 A14-I/O 83 A7
68 A5-I/O 84 C7
1 GND 1C6
2 A13-I/O 2 A6
3 A6-I/O 3 A5
4 A12-I/O 4 B5
5 A7-I/O 5 C5
— I/O* 6A4
— I/O* 7B4
6 A11-I/O 8 A3
7 A8-I/O 9 A2
8 A10-I/O 10 B3
9 A9-I/O 11 A1
Unprogrammed IOBs have a default pull-up. This prevents an undefined pad level for unbonded or unused IOBs. Programmed
outputs are default slew-rate limited.
This table describes the pinouts of three different chips in three different packages. The pin-description column lists 84 of the 118
pads on the XC3042 (and 84 of the 98 pads on the XC3030) that are connected to the 84 package pins. Ten pads, indicated by an
asterisk, do not exist on the XC3020, which has 74 pads; therefore the corresponding pins on the 84-pin packages have no
connections to an XC3020. Six pads on the XC3020 and 16 pads on the XC3030, indicated by a dash (—) in the 68 PLCC column,
have no connection to the 68 PLCC, but are connected to the 84-pin packages.
XC3000 Families 68-Pin PLCC, 84-Pin PLCC and PGA Pinouts
XC3000, XC3000A, XC3000L, XC3100 and XC3100A families have identical pinouts
