32
Interconnection Accessories
INSTALLATION - PROCEDURE
Re-Entry Procedure
• Reheat the heatshrink shape, remove to expose the Zetalok
TM
? spring and braid.
• Once spring is exposed, lift up the edge of the Zetalok
TM
spring and push it around the circumference of the assembly to form
a coil which can then be rolled around the assembly to remove the spring.
• Lift the cable screen braid off the backshell and push it back out of the way.
• Unscrew the backshell and push it back out to facilitate repairs at the connector or exposed connector area.
• Follow the practice detailed in these instructions to re-install the Zetalok
TM
spring backshell
Note: The Zetalok
TM
? spring can be installed and removed an infinite number of times if not bent or distorted in any way during the
removal process.