PIN NO.
ASSIGNMENT
PIN NO.
ASSIGNMENT
A 1 ch. 1 + B 1 ch. 1 –
A 2 ch. 2 + B 2 ch. 2 –
A 3 ch. 3 + B 3 ch. 3 –
A 4 ch. 4 + B 4 ch. 4 –
A 5 ch. 5 + B 5 ch. 5 –
A 6 ch. 6 + B 6 ch. 6 –
A 7 ch. 7 + B 7 ch. 7 –
A 8 ch. 8 + B 8 ch. 8 –
A 9 ch. 9 + B 9 ch. 9 –
A10 ch.10 + B10 ch.10 –
A11 ch.11 + B11 ch.11 –
A12 ch.12 + B12 ch.12 –
A13 ch.13 + B13 ch.13 –
A14 ch.14 + B14 ch.14 –
A15 ch.15 + B15 ch.15 –
A16 ch.16 + B16 ch.16 –
A17 – A20, B17 – B20: Unused
Fujitsu FCN type I/O connector
•
Connector Pin Assignment
CN1: Fujitsu FCN-364P040-AU
The input or output 2 (output 1 with single output
type) is connected to the connector.
RACK LOCATION NO.
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
VM1/PM1/VM4 CARD INPUT or OUTPUT
CN3
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
VM2 CARD INPUT NO. VM2 CARD OUTPUT NO.
3NC3NC
1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8
i o i o i o i o i o i o i o i o
MAC2/PAC CARD I/O (i = input, o = output)
CN1, CN2
Yokogawa DCS connector
•
Location
I/O connector: PS-40PE-D4T1-PN1
CN1: MAC2 / PAC card use*
CN2: MAC2 / PAC card use* for redundancy
CN3: VMx / PM1 card use**
The input or output 2 (output 1 with single output
type) is connected to the connector.
I/O card used for control I/O. Composed of 8 inputs
and 8 outputs. Input and output are paired. (Replace
with pulse inputs for PAC card.)
VM1: analog input 16 points
VM2: analog input 8 points / analog output 8 points
VM4: analog output 16 points
PM1: pulse input 16 points
*MAC2 card (uses KS1 cable)
**VMx / PM1 card (uses KS2 cable)
PIN NO.
ASSIGNMENT
PIN NO.
ASSIGNMENT
1
No Connection
19 ch. 8 –
2
No Connection
20 ch. 8 +
3 ch.16 – 21 ch. 7 –
4 ch.16 + 22 ch. 7 +
5 ch.15 – 23 ch. 6 –
6 ch.15 + 24 ch. 6 +
7 ch.14 – 25 ch. 5 –
8 ch.14 + 26 ch. 5 +
9 ch.13 – 27 ch. 4 –
10 ch.13 + 28 ch. 4 +
11 ch.12 – 29 ch. 3 –
12 ch.12 + 30 ch. 3 +
13 ch.11 – 31 ch. 2 –
14 ch.11 + 32 ch. 2 +
15 ch.10 – 33 ch. 1 –
16 ch.10 + 34 ch. 1 +
17 ch. 9 –
18 ch. 9 +
RACK LOCATION NO.
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
NIPPON SHOKUBAI DCS LOCATION NO.
Nippon Shokubai DCS connector
•
Location
CN1: HIF3F-34PA-2.54DSA
The input or output 2 (output 1 with single output
type)is connected to the connector.
•Connector Pin Assignment
Azbil DCS AI connector
I/O cable: J-RSL / J-RSK
J-RRL / J-RRK
•
Location
Input connector: 57GE-40500-751
CN1, CN2: J-HAM50 / J-HMM00 module use
The output 2 (output 1 with single output type)
is connected to the connector. The CN1 and CN2
are connected in parallel.
RACK LOCATION NO.
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
AZBIL DCS AI CONNECTOR
