143
ZIEHL industrie-elektronik, D-74523 Schwäbisch Hall, Tel. +49 791 504-0, info@ziehl.de, www.ziehl.de
Features:
inputs for up to 3 suctions.
permanent saving of all times in the EEPROM.
LED-display
2 pushbuttons for programming.
coding switch for adjustment of all times
RESET-button, resets operation period to zero or
interrupts a running vibration procedure.
VIBRATION-button, starts vibration procedure (only
if suction is not active).
Order-number: Z224305
addition of the running time of
1, 2 or 3 suctions.
introduction of vibration proce-
dure after having reached the
set total time (adjustable 4 to
120 min.) and after comple tion
of the last suction operation.
external vibration command
by closing a contact, e.g. by
lter monitoring work
spintime adjustable 10 to
300 sec.
interval vibrations 5, 15 or 20
times (disconnectable)
interval vibration time (adju-
stable 1 - 30 sec.)
interval break time (adjustable
1 - 30 sec.)
continuous vibration (adju-
stable 10 - 300 sec.)
no vibration during suction
operation.
if vibration procedure is in-
terrupted (e.g. by switching
on suction), the same will
be recommenced at the next
possible opportunity.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Vibrator Control RSP1
with Time addition
RSP1
The vibration control RSP1 is
a compact multiple timing relay
for capturing operation times of
suction plants and for triggering
vibrators.
It provides optimal control of the
vibration device by collecting of
operating times of up to 3 suctions
with variable programs for vibration procedures (spinti-
me, interval- and permanent vibration) and programmab-
le vibration periods. LED displays provide information
about the operational state at any time.
All times are permanently saved in an EEPROM. Thus
the accumulated operation period of the suction opera-
tion saved when switching off the supply voltage, e.g.
during the night or weekend.
Technical Data
AC 220 - 240 V, ± 10%, 50/ 60 Hz, < 3 VA
1 NO
type 2 see "general technical informations"
see "general technical informations"
-20°C...+55°C
approx. DC 24 V/3 mA
approx. DC 5 V/5 mA
Design S 12: 41.5 x 82 x 121
IP 30/ IP 20
on 35 mm standard rail according to EN 60 715 or with
M4 screws.
approx. 300 g
Supply voltage U
s
Relay output
Contact type
Test Conditions
max. ambient temperature
Inputs
Contact 6, 7, 8 against 5
Contact 1 against 4
Casing dimensions (W x H x D)
Protection housing/terminals
Mounting
Weight
4
Edition Feb. 2011
