53
ZIEHL industrie-elektronik, 74523 Schwäbisch Hall, Germany, +49 791 504-0, info@ziehl.de, www.ziehl.de
General
Pt100 Temperature Sensors Type TF101
Ø 4,5
20 2000
±10
LIYWYW 3x 0,25 mm²
rt / RD
rt / RD
ws / WH
10
1
Pt100-Temperature-Sensores Type TF
Types / Description
TF101 temperature sensors use
EN 60751/IEC 60751 platinum
resistance temperature detectors
(RTD). For precise temperature
measurement the Platinum Re-
sistance Thermometer oers the best overall advantages
in repeatability and stability over a long period. High
accuracy allows replacement of a sensor without any
need for re-adjust of the connected measuring devices
or thermostats.
Platinum resistance temperature
sensor on ceramic substrate
intended for installation into any
housing depending to user’s re-
quirements. Very small and quick
sensor, only suitable for further
treatment. Notice: do not cut the
sensor leads. Thermal response
time refer to manufacturer data:
T
0,9
in the air 10 s, in water <1 s.
Part number: 019061
Platinum resistance temperature
sensor on ceramic substrate pro-
tected by a heat-shrinkable sleeve
and with PTFE isolated stranded
wire. The TF101K version can be
installed in motor or transformer
windings. When build-in into
windings do not pressure the
sensor element. Precautions
should be taken to protect sen-
sor and extension leads against
push and pull forces. Thermal
response time T
0,9
in the air 100
s, in water 19 s.
With 2-wire connection and cable-length of 2 m there
is a temperature-failure of approx. 0.51 Ω = 1.32 K
caused by the line resistance.
Cable length: 2000 mm
Weight: 10 g
Part numbers: T223154 2-wire
T223134 3-wire
Sensors TF101U2 are encapsula-
ted in a stainless-steel-shell V4A.
They are suitable for measuring
temperatures in uids, at surfaces
or for inside or outside applicati-
ons. The protection class is IP 66.
The version with PVC-insulated
cable (3 x 0,25 mm
2
in one
cable) can be easily wired. The
maximum ambient temperature
is 105 °C.
The sensor with cable 30mm
(PVC) can be mounted in ter-
minals in switchgear cabinets
to measure temperature in en-
closure.
The version with PTFE-insulation
(3 x 0,14 mm
2
single wires) with-
stands peak-temperatures up to
200 °C
Weights: PVC: 2 m = 50 g, 10 m = 250 g,
30 mm = 15 g
PTFE: 2 m = 20 g
Part numbers:
T223051 3-wire 2 m PVC -30...+105 °C
T223058 3-wire 10 m PVC -30...+105 °C
T223052 3-wire 2 m PTFE -50...+170 °C
T223047 2-wire 30 mm PVC -30... +80 °C
2018-01-17
TF101N
-70°C...+500°C
TF101K
-50°C...+170°C
TF101U2
-30°C...+105°C
-50°C...+170°C
-30°C...+80°C