DS922 (v1.1) May 9, 2016 www.xilinx.com
Advance Product Specification 1
© Copyright 2015–2016 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of
Xilinx in the United States and other countries. AMBA, AMBA Designer, ARM, ARM1176JZ-S, CoreSight, Cortex, and PrimeCell are trademarks of ARM in the EU and other
countries. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All other trademarks are the property of their respective owners.
Summary
The Xilinx® Kintex® UltraScale+™ FPGAs are available in -3, -2, -1 speed grades, with -3E devices having
the highest performance. The -2LE and -1LI devices can operate at a V
CCINT
voltage at 0.85V or 0.72V and
provide lower maximum static power. When operated at a V
CCINT
voltage at 0.72V, the -2LE and -1LI
performance and static and dynamic power is reduced. However, when operated at a V
CCINT
voltage of
0.85V using -2LE and -1LI devices, the speed specification for the L devices is the same as the -2I or -1I
speed grades with reduced static power.
DC and AC characteristics are specified in extended (E) and industrial (I) temperature ranges. Except the
operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the
same for a particular speed grade (that is, the timing characteristics of a -1 speed grade extended device
are the same as for a -1 speed grade industrial device). However, only selected speed grades and/or
devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions.
The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the Kintex UltraScale+ FPGAs, is available on
the Xilinx website at www.xilinx.com/documentation
.
DC Characteristics
Kintex UltraScale+ FPGAs Data Sheet:
DC and AC Switching Characteristics
DS922 (v1.1) May 9, 2016
Advance Product Specification
Table 1: Absolute Maximum Ratings
(1)
Symbol Description Min Max Units
FPGA Logic
V
CCINT
Internal supply voltage. –0.500 1.000 V
V
CCINT_IO
(2)
Internal supply voltage for the I/O banks. –0.500 1.000 V
V
CCAUX
Auxiliary supply voltage. –0.500 2.000 V
V
CCBRAM
Supply voltage for the block RAM memories. –0.500 1.000 V
V
CCO
Output drivers supply voltage for HD I/O banks. –0.500 V
Output drivers supply voltage for HP I/O banks. –0.500 V
V
CCAUX_IO
(3)
Auxiliary supply voltage for the I/O banks. –0.500 2.000 V
V
REF
Input reference voltage. V
V
IN
(4)(6)(7)
I/O input voltage for HD I/O banks
(5)
.–0.500V
I/O input voltage for HP I/O banks. –0.550 V
CCO
+ 0.550 V
V
BATT
Key memory battery backup supply –0.500 2.000 V