• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • LVCMOS18_F12 PDF文件及第1页内容在线浏览

LVCMOS18_F12

LVCMOS18_F12首页预览图
型号: LVCMOS18_F12
PDF文件:
  • LVCMOS18_F12 PDF文件
  • LVCMOS18_F12 PDF在线浏览
功能描述: DC and AC Switching Characteristics
PDF文件大小: 2029.06 Kbytes
PDF页数: 共62页
制造商: XILINX[Xilinx, Inc]
制造商LOGO: XILINX[Xilinx, Inc] LOGO
制造商网址: http://www.xilinx.com
捡单宝LVCMOS18_F12
PDF页面索引
120%
DS181 (v1.21) September 27, 2016 www.xilinx.com
Product Specification 1
© 2011– 2016 Xilinx, Inc. XILINX, the Xilinx logo, Artix, Virtex, Kintex, Zynq, Spartan, ISE, Vivado and other designated brands included herein are trademarks of Xilinx in the
United States and other countries. All other trademarks are the property of their respective owners.
Introduction
Artix®-7 FPGAs are available in -3, -2, -1, -1LI, and -2L
speed grades, with -3 having the highest performance. The
Artix-7 FPGAs predominantly operate at a 1.0V core voltage.
The -1LI and -2L devices are screened for lower maximum
static power and can operate at lower core voltages for
lower dynamic power than the -1 and -2 devices,
respectively. The -1LI devices operate only at
V
CCINT
=V
CCBRAM
= 0.95V and have the same speed
specifications as the -1 speed grade. The -2L devices can
operate at either of two V
CCINT
voltages, 0.9V and 1.0V and
are screened for lower maximum static power. When
operated at V
CCINT
= 1.0V, the speed specification of a -2L
device is the same as the -2 speed grade. When operated at
V
CCINT
= 0.9V, the -2L static and dynamic power is reduced.
Artix-7 FPGA DC and AC characteristics are specified in
commercial, extended, industrial, expanded (-1Q), and
military (-1M) temperature ranges. Except the operating
temperature range or unless otherwise noted, all the DC
and AC electrical parameters are the same for a particular
speed grade (that is, the timing characteristics of a -1M
speed grade military device are the same as for a -1C speed
grade commercial device). However, only selected speed
grades and/or devices are available in each temperature
range. For example, -1M is only available in the
defense-grade Artix-7Q family and -1Q is only available in
XA Artix-7 FPGAs.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The parameters
included are common to popular designs and typical
applications.
Available device and package combinations can be found in
:
7 Series FPGAs Overview (DS180
)
Defense-Grade 7 Series FPGAs Overview (DS185
)
XA Artix-7 FPGAs Overview (DS197
)
This Artix-7 FPGA data sheet, part of an overall set of
documentation on the 7 series FPGAs, is available on the
Xilinx website at www.xilinx.com/
documentation.
DC Characteristics
Artix-7 FPGAs Data Sheet:
DC and AC Switching Characteristics
DS181 (v1.21) September 27, 2016 Product Specification
Table 1: Absolute Maximum Ratings
(1)
Symbol Description Min Max Units
FPGA Logic
V
CCINT
Internal supply voltage –0.5 1.1 V
V
CCAUX
Auxiliary supply voltage –0.5 2.0 V
V
CCBRAM
Supply voltage for the block RAM memories –0.5 1.1 V
V
CCO
Output drivers supply voltage for HR I/O banks –0.5 3.6 V
V
REF
Input reference voltage –0.5 2.0 V
V
IN
(2)(3)(4)
I/O input voltage –0.4 V
CCO
+0.55 V
I/O input voltage (when V
CCO
= 3.3V) for V
REF
and differential I/O standards
except TMDS_33
(5)
–0.4 2.625 V
V
CCBATT
Key memory battery backup supply –0.5 2.0 V
GTP Transceiver
V
MGTAVCC
Analog supply voltage for the GTP transmitter and receiver circuits –0.5 1.1 V
V
MGTAVTT
Analog supply voltage for the GTP transmitter and receiver termination circuits –0.5 1.32 V
V
MGTREFCLK
Reference clock absolute input voltage –0.5 1.32 V
V
IN
Receiver (RXP/RXN) and Transmitter (TXP/TXN) absolute input voltage –0.5 1.26 V
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价