• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • LVCMOS15_S_4 PDF文件及第1页内容在线浏览

LVCMOS15_S_4

LVCMOS15_S_4首页预览图
型号: LVCMOS15_S_4
PDF文件:
  • LVCMOS15_S_4 PDF文件
  • LVCMOS15_S_4 PDF在线浏览
功能描述: DC and AC Switching Characteristics
PDF文件大小: 1378.85 Kbytes
PDF页数: 共79页
制造商: XILINX[Xilinx, Inc]
制造商LOGO: XILINX[Xilinx, Inc] LOGO
制造商网址: http://www.xilinx.com
捡单宝LVCMOS15_S_4
PDF页面索引
120%
DS892 (v1.12) April 1, 2016 www.xilinx.com
Product Specification 1
© Copyright 2013–2016 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of
Xilinx in the United States and other countries. All other trademarks are the property of their respective owners.
Summary
The Xilinx® Kintex® UltraScale™ FPGAs are available in -3, -2, -1, and -1L speed grades, with -3 having the
highest performance. The -1L devices can operate at either of two V
CCINT
voltages, 0.95V and 0.90V and
are screened for lower maximum static power. When operated at V
CCINT
= 0.95V, the speed specification
of a -1L device is the same as the -1 speed grade. When operated at V
CCINT
= 0.90V, the -1L performance
and static and dynamic power is reduced.
DC and AC characteristics are specified in commercial, extended, and industrial temperature ranges.
Except the operating temperature range or unless otherwise noted, all the DC and AC electrical
parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed
grade industrial device are the same as for a -1 speed grade commercial device). However, only selected
speed grades and/or devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions.
The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the UltraScale architecture-based devices, is
available on the Xilinx website at www.xilinx.com/ultrascale
.
DC Characteristics
Kintex UltraScale FPGAs Data Sheet:
DC and AC Switching Characteristics
DS892 (v1.12) April 1, 2016
Product Specification
Table 1: Absolute Maximum Ratings
(1)
Symbol Description Min Max Units
FPGA Logic
V
CCINT
Internal supply voltage –0.500 1.100 V
V
CCINT_IO
(2)
Internal supply voltage for the I/O banks –0.500 1.100 V
V
CCAUX
Auxiliary supply voltage –0.500 2.000 V
V
CCBRAM
Supply voltage for the block RAM memories –0.500 1.100 V
V
CCO
Output drivers s upp ly vol t ag e for HR I/O banks –0.500 3.4 00 V
Output drivers s upp ly vol t ag e for HP I/O banks –0.500 2.0 00 V
V
CCAUX_IO
(3)
Auxiliary supply voltage for the I/O banks –0.500 2.000 V
V
REF
Input reference voltage –0.500 2.000 V
V
IN
(4)(6)(7)
I/O input voltage for HR I/O banks
(5)
–0.400 V
CCO
+ 0.550 V
I/O input volt ag e for HP I/O banks –0.550 V
CCO
+ 0.550 V
I/O input voltage (when V
CCO
= 3.3V) for V
REF
and differential I/O
standards except TMDS_33
(8)
–0.400 2.625 V
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价