DS114 (v1.9) February 8, 2008 www.xilinx.com
Product Specification 1
© 2002–2008 Xilinx, Inc. All rights reserved. XILINX, the Xilinx logo, the Brand Window, and other designated brands included herein are trademarks of Xilinx, Inc. All other
trademarks are the property of their respective owners.
This product is undergoing discontinuance. Please refer to XCN07022, Product Discontinuation Notice, for more information
on last-time purchases and replacement products.
Features
• Supported by ISE™ iMPACT download software (v5.1i
SP3 or higher)
• Externally powered using +5V DC power brick
♦ Same power brick can be used for Parallel Cable IV
• Download speeds up to 10 Megabits per second (Mb/s)
• LED status indicators
• Uses IEEE 1284 ECP protocol for high-speed
communications
• Uses quick-connect, off-the-shelf IEEE 1284 parallel
cable
• Power cord options for US/Asia/Japan/Europe/UK
Desktop Device Programming
• Device adapters are available for:
♦ XC18V00 ISP PROM family
♦ Platform Flash PROM family
♦ CoolRunner™-II CPLD family
• Automatically switches power during programming
• Automatically identifies and confirms proper adapter
selection
• Has short-circuit protection in the event of improper
device insertion
In-System Programming/Configuration
• Automatically senses and adapts to target I/O voltage
• Interfaces to devices operating at 5V (TTL), 3.3V
(LVCMOS), 2.5V, 1.8V, and 1.5V
• Supports IEEE 1149.1 (JTAG), serial peripheral
interface (SPI), Xilinx Slave-Serial, and Xilinx Slave-
SelectMAP (8-bit)
• In-system configures the following Xilinx devices:
♦ Virtex™ series FPGAs
♦ Spartan™ series FPGAs
♦ CoolRunner/CoolRunner-II CPLDs
♦ Platform Flash PROM family
♦ XC18V00 ISP PROM family
♦ XC4000 series FPGAs
♦ XC9500/XL/XV CPLDs
• J Drive compatible with IEEE 1532 Programming Engine
• ChipScope™ Pro Analyzer compatible
• Embedded Development Kit (EDK) compatible
• Includes high-performance ribbon cables
♦ 14-conductor ribbon cable can be used with
Parallel Cable IV
• Intended for development — not recommended for
production programming
MultiPRO Desktop Tool Description
The MultiPRO Desktop Tool (Figure 1) is a multi-function
programming and configuration cable. When mated with
MultiPRO device adapters, it can program individual
Platform Flash PROMs, XC18V00 ISP PROMs and
CoolRunner-II CPLDs. Alternatively, the tool can perform in-
system programming or FPGA configuration when attached
to user hardware by way of the included ribbon cables. IEEE
1149.1 (JTAG), serial peripheral interface (SPI), Xilinx
Slave-Serial, and Xilinx Slave-SelectMAP (8-bit) protocols
are supported in ISP mode.
Designed for use in a desktop environment, the MultiPRO
Desktop Tool interfaces to a PC using the industry standard
IEEE 1284 parallel port. An external AC power brick
provides +5V DC to the pod. An integral power switch
facilitates fail-safe connection to target systems.
A variety of device adapters are available for standalone
programming of Xilinx Platform Flash PROMs, XC18V00
ISP PROMs, and CoolRunner-II CPLDs.
1
2
MultiPRO Desktop Tool
DS114 (v1.9) February 8, 2008 Product Specification
R
X-Ref Target - Figure 1
Figure 1: Xilinx MultiPRO Desktop Tool