• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • HSTL_I_18 PDF文件及第1页内容在线浏览

HSTL_I_18

HSTL_I_18首页预览图
型号: HSTL_I_18
PDF文件:
  • HSTL_I_18 PDF文件
  • HSTL_I_18 PDF在线浏览
功能描述: DC and AC Switching Characteristics
PDF文件大小: 974.06 Kbytes
PDF页数: 共56页
制造商: XILINX[Xilinx, Inc]
制造商LOGO: XILINX[Xilinx, Inc] LOGO
制造商网址: http://www.xilinx.com
捡单宝HSTL_I_18
PDF页面索引
120%
DS923 (v1.0) April 20, 2016 www.xilinx.com
Advance Product Specification 1
© Copyright 2016 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of Xilinx
in the United States and other countries. AMBA, AMBA Designer, ARM, ARM1176JZ-S, CoreSight, Cortex, and PrimeCell are trademarks of ARM in the EU and other
countries. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All other trademarks are the property of their respective owners.
Summary
The Xilinx® Virtex® UltraScale+™ FPGAs are available in -3, -2, -1 speed grades, with -3E devices having
the highest performance. The -2LE and -1LI devices can operate at a V
CCINT
voltage at 0.85V or 0.72V and
provide lower maximum static power. When operated at a V
CCINT
voltage at 0.72V, the -2LE and -1LI
performance and static and dynamic power is reduced. However, when operated at a V
CCINT
voltage of
0.85V using -2LE and -1LI devices, the speed specification for the L devices is the same as the -2I or -1I
speed grades with reduced static power.
DC and AC characteristics are specified in extended (E) and industrial (I) temperature ranges. Except the
operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the
same for a particular speed grade (that is, the timing characteristics of a -1 speed grade extended device
are the same as for a -1 speed grade industrial device). However, only selected speed grades and/or
devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions.
The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the Virtex UltraScale+ FPGAs, is available on
the Xilinx website at virtex-ultrascale-plus
.
DC Characteristics
Virtex UltraScale+ FPGA Data Sheet:
DC and AC Switching Characteristics
DS923 (v1.0) April 20, 2016
Advance Product Specification
Table 1: Absolute Maximum Ratings
(1)
Symbol Description Min Max Units
FPGA Logic
V
CCINT
Internal supply voltage. –0.500 1.000 V
V
CCINT_IO
(2)
Internal supply voltage for the I/O banks. –0.500 1.000 V
V
CCAUX
Auxiliary supply voltage. –0.500 2.000 V
V
CCBRAM
Supply voltage for the block RAM memories. –0.500 1.000 V
V
CCO
Output drivers supply voltage for the I/O banks. –0.500 V
V
CCAUX_IO
(3)
Auxiliary supply voltage for the I/O banks. –0.500 2.000 V
V
REF
Input reference voltage. V
V
IN
(4)(5)(6)
I/O input voltage for I/O banks. –0.550 V
CCO
+ 0.550 V
V
BATT
Key memory battery backup supply –0.500 2.000 V
I
DC
Available output current at the pad. mA
I
RMS
Available RMS output current at the pad. mA
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价