GP2A20/GP2A22
GP2A20/GP2A22
∗1 Collector-emitter voltage of output transistor
∗2 Collector current of output transistor
∗3 The connector should be plugged in/out at normal temperature.
■ Outline Dimensions
(
Unit : mm
)
■ Features
■ Absolute Maximum Ratings
■ Applications
(
Ta= 25˚C
)
Parameter Symbol Rating Unit
Supply voltage V
CC
- 0.5 to 7 V
∗1
Output voltage V
O
30 V
∗
2
Low level output current
I
OL
50 mA
∗3
Operating temperature T
opr
- 10 to + 60
˚C
∗3
T
stg
- 20 to + 80
˚C
1. Light modulation type, free from external
disturbing light
2. Long focal distance type
(
GP2A20: 3 to 7mm
)
(
GP2A22: 9 to 15mm
)
3. Capable of TTL direct connection
1. Copiers
2. Laser beam printers
3. Facsimiles
Oscillator
Synchronous detection
Demodulator circuit
Voltage regulator
Comparator
Amp.
Internal connection diagram
7.0
3.5
9.6
R4.0
33.0
26.5
11.0
11.0
4.0
3.5
3.0
❈
Resin sealed
3.5
2.0
1
2
3
Lot No.
3 GND
Dimensions
(
d
)
Tolerance
d<6.0 ± 0.2
6.0<=d<14.0 ± 0.3
14 <=d ± 0.4
∗
(
)
: Reference dimensions
Marking:
GP2A20
(
2.5
)
(
2.5
)
∗Unspecified tolerances shall be as follows;
❈ MOLEX JAPAN CO.,
LTD made
3- pin connector
52135 - 0350
Housing SD-51030-0310
Terminal SD-50084-8100
Lot No.
Detecting range
3 to 7mm
Model No. GP2A20 GP2A22
GP2A22
9 to 15mm
1
2
3
Light Modulation, Long Focal
Distance Type OPIC
Photointerrupter
4. With 3-pin connector provided for easier
interface with peripheral control circuit
■ Line-ups
Detecting range
Storage temperature
Marking on the side
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
*“ OPIC ”
(
Optical IC
)
is a trademark of the SHARP Corporation.
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
1 V
CC
2 V
O
3-φ3.2
φ 3.0
+ 0
- 0.2
