GP1S74PJ000F
1
Sheet No.: D3-A04401EN
Date Oct. 3. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
GP1S74PJ000F
Gap : 5mm Slit : 0.5mm
Phototransistor Output,
Snap-in fi xing
Transmissive Photointerrupter with
Connector
■
Description
GP1S74PJ000F
is a standard, phototransistor output,
transmissive photointerrupter with opposing emitter and
detector in a case, providing non-contact sensing. For
this family of devices, the emitter and detector are insert-
ed in a case, and a 3-pin connector is included to allow
remote-mount or off-board designs.
■
Features
1. Transmissive with phototransistor output
2. Highlights :
• Special position hooks compatible with 3 different
plate thicknesses (1.0, 1.2, 1.6mm)
• Snap insertion
3. Key Parameters :
• Gap Width : 5mm
• Slit Width (detector side): 0.5mm
• Package : 17×12.8×8mm (without connector and
hooks)
• Connector : Tyco Electronics AMP K.K.
(PN : 292133-3)
4. Lead free and RoHS directive compliant
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : PPC, FAX, Printer
