GP1S56TJ000F
1
Sheet No.: D3-A02701EN
Date Oct. 3. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
GP1S56TJ000F
Gap : 2mm, Slit : 0.15mm
Phototransistor Output,
Case package Transmissive
Photointerrupter
■
Description
GP1S56TJ000F
is a standard, phototransistor output,
transmissive photointerrupter with opposing emitter and
detector in a case, providing non-contact sensing. For
this family of devices, the emitter and detector are insert-
ed in a case, resulting in a through-hole design.
This device is unique because it uses position pins
to insure accurate placement on the PCB, and has the
short profi le.
■
Features
1. Transmissive with phototransistor output
2. Highlights :
• Vertical Slit for alternate motion detection
• Positioning Pin to prevent misalignment
• High resolution (Slit width : 0.15 mm)
3. Key Parameters :
• Gap Width : 2mm
• Slit Width (detector side): 0.15mm
• Package : 11
×
7.5
×
5mm
4. Lead free and RoHS directive compliant
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : Printer, FAX, Optical storage unit
