GP1A75EJ000F
1
Sheet No.: D3-A04801EN
Date Oct. 3. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
GP1A75EJ000F
Gap : 5mm Slit : 0.5mm
*
OPIC Output,
Screw fi xing type
Transmissive Photointerrupter
with Connector
■
Description
GP1A75EJ000F
are standard, OPIC output, transmis-
sive photointerrupters with opposing emitter and detector
in a case, providing non-contact sensing. For this fam-
ily of devices, the emitter and detector are inserted in a
case, and a 3-pin connector is included to allow remote-
mount or off-board designs.
■
Features
1. Transmissive with OPIC output
2. Highlights :
• Includes additional screw fi xing holes
• Straight drop insertion
3. Key Parameters :
• Gap Width : 5mm
• Slit Width (detector side): 0.5mm
• Package : 24
×
12.8
×
8mm (without connector and
hooks)
• Connector : Tyco Electronics AMP (PN : 292133-3)
• Output Type : Low when the object is present.
4. Lead free and RoHS directive compliant
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of object presence or mo-
tion.
2. Example: PPC, FAX, Printer
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing