GP1A73AJ000F
1
Sheet No.: D3-A04601EN
Date Oct. 3. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
GP1A73AJ000F
Gap : 5mm Slit : 0.5mm
*OPIC Output,
Snap-in type
Transmissive Photointerrupter with
Connector
■
Description
GP1A73AJ000F
is a standard, OPIC output, transmis-
sive photointerrupter with opposing emitter and detector
in a case, providing non-contact sensing. For this fam-
ily of devices, the emitter and detector are inserted in a
case, and a 3-pin connector is included to allow remote-
mount or off-board designs.
■
Features
1. Transmissive with OPIC output
2. Highlights :
• Special position hooks compatible with 3 different
plate thicknesses (1.0, 1.2, 1.6mm)
• Hinged snap insertion
3. Key Parameters :
• Gap Width : 5mm
• Slit Width (detector side): 0.5mm
• Package : 17×12.8×8mm (without connector and
hooks)
•
Connector : Tyco Electronics AMP K.K. (PN : 292133-3)
or SUMIKO TEC CO., LTD.
(PN : GH4A003P000ZA)
• Output Type : High when the object is present with
Pullup Resistor.
4. Lead free and RoHS directive compliant
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : PPC, FAX, Printer
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing