GP1A58HRJ00F
1
Sheet No.: D3-A04001EN
Date Oct. 3. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
GP1A58HRJ00F
Gap : 5mm, Slit : 0.5mm
*
OPIC Output
Case package Transmissive
Photointerrupter
■
Description
GP1A58HRJ00F
is a standard, OPIC output, trans-
missive photointerrupter with opposing emitter and de-
tector in a case, providing non-contact sensing. For this
family of devices, the emitter and detector are inserted in
a case, resulting in a through-hole design.
This device has a wide gap and positioning pins.
■
Features
1. Transmissive with OPIC output
2. Highlights:
• Vertical Slit for alternate motion detection
• Output Low Level at intercepting optical path
• Positioning Pin to prevent misalignment
3. Key Parameters:
• Gap Width : 5mm
• Slit Width (detector side) : 0.5mm
• Package : 13.7
×
10
×
5.2mm
4. Lead free and RoHS directive compliant
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : Printer, FAX, Optical storage unit
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
