GP1A05AJ000F Series
1
Sheet No.: D3-A04501EN
Date Oct. 3. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
GP1A05AJ000F
Series
Gap : 5mm, Slit : 0.5mm
*
OPIC Output
Transmissive Photointerrupter
with Connector
■
Description
GP1A05AJ000F Series
are standard, OPIC output,
transmissive photointerrupters with opposing emitter and
detector in a case, providing non-contact sensing. For
this family of devices, the emitter and detector are insert-
ed in a case, and a 3-pin connector is included to allow
remote-mount or off-board designs.
■
Features
1. Transmissive with OPIC output
2. Highlights :
• Includes additional screw fi xing holes
• Positioning Pin to prevent misalignment
3. Key Parameters:
• Gap Width : 5mm
• Slit Width (detector side) : 0.5mm
• Package : 34
×
18
×
11mm (without connector and
positloning pin)
• Connector :
GP1A05AJ000F
; Tyco Electronics
AMP K.K. (PN : 171825-3)
GP1A05A2J00F
; J.S.T. Mfg Co., Ltd.
(PN : B3P-SHF-IAA (LF))
GP1A05A5J00F
; Molex-Japan Co.,
Ltd. (PN : 5267-03A)
• Output Type : High when the object is present with
Pullup Resistor
4. Lead free and RoHS directive compliant
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of object presence or mo-
tion.
2. Example: PPC, FAX, Printer
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing