EV4034-S-00B
85VAC-265VAC/50Hz, 10V/350mA
Primary-Side-Controlled,
Offline, LED Driver Evaluation Board
EV4034-S-00B Rev.1.1 www.MonolithicPower.com 1
5/1/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2018 MPS. All Rights Reserved.
DESCRIPTION
The EV4034-S-00B Evaluation Board
demonstrates the capabilities of the MP4034: a
primary-side-controlled, offline, LED lighting
controller that eliminates secondary feedback
components.
The EV4034-S-00B typically drives a 3.5W LED
string with a 10V
TYP
, 350mA LED load from
85VAC to 265VAC at 50Hz.
The EV4034-S-00B has excellent efficiency and
meets IEC61547 surge immunity and EN55015-
conducted EMI requirements. It has multiple
protections, including open-circuit protection,
short-circuit protection, a cycle-by-cycle current
limit, and over-temperature protection.
ELECTRICAL SPECIFICATION
FEATURES
Primary-Side Control without Opto-Coupler
and Secondary Feedback Circuit
Precise Constant Current (CC)
Integrated 700V MOSFET with Minimal
External Components
Variable, Off-Time, Peak-Current Control
600µA High-Voltage Current Source
Up to 3.5W Output Power
Over-Voltage Protection (OVP)
Over-Temperature Protection (OTP)
Open-Loop Protection (OLP)
Natural Frequency Dithering for Improved
EMI Signature
Low Cost and Simple External Circuit
Fits GU10 LED
APPLICATIONS
Solid-State Lighting
Industrial & Commercial Lighting
Residential Lighting
All MPS parts are lead-free and adhere to the RoHS directive. For MPS
green status, please visit MPS website under Quality Assurance. “MPS” and
“The Future of Analog IC Technology”, are Registered Trademarks of
Monolithic Power Systems, Inc.
Warning: Although this board is designed to satisfy safety
requirements, the engineering prototype has not been
agency approved. Therefore, all testing should be performed
using an isolation transformer to provide the AC input to the
prototype board.