EV3214DQ-00A
500mA, LED Camera Flash
Charge Pump EV Board
EV3214DQ-00A Rev. 1.0 www.MonolithicPower.com 1
6/29/2009 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The EV3214DQ-00A is an evaluation board for
the MP3214, a low noise, high current LED
driver intended for camera phone application. It
can drive LEDs at up to 500mA with an input
supply of 2.7 to 5.5 volts.
The high efficiency and low external parts count
(two small bypass caps, two small charge pump
caps and one programming resistor) make the
MP3214 ideally suited for portable applications
where small size and high efficiency are critical.
The MP3214 employs an efficient inductor less
charge pump with 1x, 1.5x and 2x automatic
mode control to achieve high efficiency power
conversions.
ELECTRICAL SPECIFICATIONS
Parameter Symbol Value Units
Input Voltage V
BATT
2.7-5.5 V
LED of flash Current IF LASH 200 mA
FEATURES
• High efficiency.
• Up to 500mA output current.
• Wide supply range of 2.7V to 5.5V.
• Adjustable output LED current.
• PWM brightness control.
• Open /Short LED protection.
• Thermal shut down protection.
• Under-Voltage protection.
• Available in a 3mm × 3mm 16pins QFN
package.
APPLICATIONS
• LED backlight
• LED flash
• LED torch/Flashlight
• Cell phone, Cameras PDA and Handheld
equipment
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
EV3214DQ–00A EVALUATION BOARD
(L x W x H) 2.2” x 1.6” x 0.4”
(6.1cm x 5.1cm x 1.4cm)
Board Number MPS IC Number
EV3214DQ-00A MP3214DQ
Efficiency VS. Battery Voltage
EFFICIENCY(%)
2.4 2.7 2.9 3.2 3.5 3.8 4.1 4.3 4.6 4.9 5.2 5.5 5.7 6.0
V_BATTERY(V)
IFlash=200mA
IFlash=300mA
IFlash=500mA