EV1519DQL-00A
1x, 1.5x, 2x High Efficiency Charge Pump
3 White LED Driver Evaluation Board
EV1519DQL-00A Rev. 1.1 www.MonolithicPower.com 1
10/27/2005 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2005 MPS. All Rights Reserved.
The Future of Analog IC Technology
TM
TM
DESCRIPTION
The EV1519DQL-00A is an evaluation board for
the MP1519, a fully automatic driver for
powering three white LEDs, with up to 4V
forward voltage, from a single Li-Ion or three
NiMH cells. The driver performs all of the
sensing and control to run the LEDs at an
optimum charge pump ratio for efficiency
without an expensive inductor. The driver
allows PWM operation to support brightness
control.
The tiny 3mm x 3mm QFN16 package and
small external capacitors allow for the most
compact white LED solution available.
ELECTRICAL SPECIFICATIONS
Parameter Symbol Value Units
# of WLEDs 3
Input Voltage V
IN
2.5 – 5.5 V
LED Current I
LED
20 mA
FEATURES
• 2% LED Current Matching
• High Efficiency (>93%)
• Current Source Outputs
• No Ballast Resistors Required
• 1x, 1.5x and 2x Automatic Modes
• Constant Frequency Operation
• Automatic LED Detection
• High and Low Frequency PWM Capability
• 2.5V to 5.5V Operation
• Less than 1µA Leakage during Shutdown
• Detects Changes in Battery Level
• No External Schottky Diode Required
• Soft-Start and Soft Switching Operation
APPLICATIONS
• Cell Phones
• PDA or Hand Held Computers
• White LED Application at 3.6V Supply
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
EV1519DQL-00A EVALUATION BOARD
Dimensions (2.3”X x 1.8”Y x 0.4”Z)
Board Number MPS IC Number
EV1519DQL-00A MP1519DQL
100
90
80
70
60
50
40
30
20
10
EFFICIENCY (%)
2.5 3.0 3.5 4.0 4.5
SUPPLY VOLTAGE (V)
MP1519L_EC01
I
LED
=20mA
I
LED
=10mA
I
LED
=5mA
Efficiency vs
Supply Voltage
V
LED
= 3.23V @ 20mA