Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-33 –
A±0.2
WL
( ) Reference size
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)
'$K
Capacitance (μF)
Rated voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
Products Black Dot
(Square)
■ Features
●
Endurance : 105 °C 1000 h
●
Low impedance (1/2 for HA series)
●
Vibration-proof product is available upon request. (
0
8 mm and larger)
● AEC-Q200 qualifi ed
✽
●
RoHS directive compliant
Surface Mount Type
Series:
FC
Type:
V
FC
High temperature Lead-Free re ow(suf x:A
✽
)
■ Speci cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 35 V.DC
Nominal Cap. Range 1 μF to 1500 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan
d
Please see the attached High temperature lead-free refl ow products list.
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35
(Impedance ratio at 120 Hz)Z(–25 °C) / Z(+20 °C)22222
Z(–40 °C) / Z(+20 °C)33333
Endurance
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change ±20 % of initial measured value
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance.(With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan
d
<
initial specifi ed value
DC leakage current
<
initial specifi ed value
■ Dimensions in mm (not to scale) ■ Marking
Example:6.3 V 22 μF
Marking color : BLACK
HA
FC
Low impedance
↑
Size
code
D L A, B H I W P K
B 4.0 5.4
-0.2
4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
-0.20
C 5.0 5.4
-0.2
5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
-0.20
D 6.3 5.4
-0.2
6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
-0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
-0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
+0.1
+0.1
+0.1
+0.15
+0.15
+0.15
+0.15
Frequency (Hz)
50, 60 120 1 k 10 k 100 k to
Correction factor 0.70 0.75 0.90 0.95 1.00
■ Frequency correction factor for ripple current
j 6.3 V
A 10 V
C 16 V
Rated Voltage Mark
E 25 V
V 35 V
(Unit : mm)
✽
This product qualify for AEC-Q200, but it has some deviations.
01 Mar. 2014
