• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • DTS050400UC-P5P-KH PDF文件及第1页内容在线浏览

DTS050400UC-P5P-KH

DTS050400UC-P5P-KH首页预览图
型号: DTS050400UC-P5P-KH
PDF文件:
  • DTS050400UC-P5P-KH PDF文件
  • DTS050400UC-P5P-KH PDF在线浏览
功能描述: Xilinx Parallel Cable IV
PDF文件大小: 414.25 Kbytes
PDF页数: 共9页
制造商: XILINX[Xilinx, Inc]
制造商LOGO: XILINX[Xilinx, Inc] LOGO
制造商网址: http://www.xilinx.com
捡单宝DTS050400UC-P5P-KH
PDF页面索引
120%
DS097 (v3.0) January 21, 2016 www.xilinx.com PN 0010988 02
Product Specification 1
© 2001–2008, 2016 Xilinx, Inc. All rights reserved. XILINX, the Xilinx logo, Virtex, Spartan, ISE and other designated brands included herein are trademarks of Xilinx in the United
States and other countries. All other trademarks are the property of their respective owners.
— PRODUCT OBSOLETE — PRODUCT OBSOLETE — PRODUCT OBSOLETE —
Features
Download speed of up to 5 Megabits per second (Mb/s)
Over eight times faster than Xilinx Parallel Cable III
using Xilinx ISE® iMPACT download software
Embedded Development Kit (EDK) compatible
ChipScope™ Pro Analyzer compatible
In-system configures the following Xilinx devices:
Virtex® series FPGAs
Spartan® series FPGAs
XC9500/XC9500XL/XC9500XV CPLDs
CoolRunner™ (XPLA3)/CoolRunner-II CPLDs
XC18V00 ISP PROMs
XC4000 series FPGAs
Platform Flash XCF00S/XCF00P/XL PROMs
LED status indicator
Automatically senses and adapts to correct I/O voltage
Interfaces to devices operating at 5V (TTL), 3.3V
(LVTTL), 2.5V, 1.8V, and 1.5V
In-system programs serial-access flash PROMs via the
serial peripheral interface (SPI)
Supports IEEE 1149.1 (JTAG), Xilinx slave-serial
mode, and serial peripheral interface (SPI)
J-Drive IEEE 1532 Programming Engine compatible
Includes high-performance ribbon cable
Compliant with IEEE 1284 Level 2 Electrical Specification
Externally powered using keyboard/mouse splitter
cable or AC power brick
Compatible with ECP-compliant I/O controllers for high-
speed, bidirectional communication
Intended for development — not recommended for
production programming
Parallel Cable IV Description
The Xilinx Parallel Cable IV (PC4) (Figure 1) is a high-speed
download cable that configures or programs all Xilinx
FPGA, CPLD, and ISP PROM devices. The cable takes
advantage of the IEEE 1284 ECP protocol and Xilinx
iMPACT software to increase download speeds over eight
times faster than existing solutions. The cable automatically
senses and adapts to target I/O voltages and is able to
accommodate a wide range of I/O standards from 1.5V to
5V. PC4 is designed for use in a desktop environment.
Note:
Xilinx also offers the Platform Cable USB II with a USB 2.0
interface to the host PC and similar capabilities as the Parallel
Cable IV. See DS
593, Platform Cable USB II, for details.
PC4 supports the widely used industry-standard IEEE
1149.1 boundary-scan (JTAG) specification, the Xilinx
slave-serial mode for Xilinx FPGA devices, and serial
peripheral interface for serial-access flash PROM
programming. PC4 supports indirect programming of select
flash memories including the Platform Flash XL
configuration and storage device (via an FPGA JTAG port).
The cable interfaces to target systems using a ribbon cable
that features integral alternating ground leads to reduce
crosstalk and improve signal integrity.
The cable is externally powered from either a power brick or
by interfacing to a standard PC mouse or keyboard
connection. A bi-color status LED indicates the presence of
operating and target reference voltages.
0
Xilinx Parallel Cable IV
DS097 (v3.0) January 21, 2016
00
Product Specification
R
X-Ref Target - Figure 1
Figure 1: Xilinx Parallel Cable IV
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价