DS06-20210-3Ea
FUJITSU MICROELECTRONICS
DATA SHEET
Copyright©2003-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved
2007.11
Semicustom
CMOS
Standard Cell
CS101 Series
■ DESCRIPTION
CS101 series, a 90 nm standard cell product, is a CMOS ASIC that satisfies user’s demands for lower power
consumption and higher speed. The leakage current of the transistors is the minimum level in the industry. Three
types of core transistors with a different threshold voltage can be mixed according to user application.
The design rules match industry standards, and a wide range of IP macros are available for use.
As well as providing a maximum of 91 million gates, approximately twice the level of integration achieved in
previous products, the power consumption per gate is also reduced by about half to 2.7 nW. Also, using the high-
speed library increases the speed by a factor of approximately 1.3, with a gate delay time of 12 ps.
■ FEATURES
• Technology : 90 nm Si gate CMOS
6- to 10-metal layers.
Low-K (low permittivity) material is used for all dielectric inter-layers.
Three different types of core transistors (low leak, standard, and high speed)
can be used on the same chip.
The design rules comply with industry standard processes.
• Power supply voltage : + 0.9 V to + 1.3 V (A wide range is supported.)
• Operation junction temperature : − 40 °C to + 125 °C (standard)
• Gate delay time : tpd = 12 ps (1.2 V, Inverter, F/O = 1)
• Gate power consumption : 2.7 nW/gate (1.2 V, 2 NAND, F/O = 1, operating rate 0.5) ,
1.8 nW/gate (1.0 V, 2 NAND, F/O = 1, operating rate 0.5)
• High level of integration : Up to 91 million gates
• Reduced chip sized realized by I/O with pad.
• Two types of library sets are supported. (Performance focused (1.2 V) , Low power consumption supported
(0.9 V to 1.3 V) )
• Low power consumption design (multi-power supply design and power gating) is supported.
• Compliance with industry standard design rules enables non-Fujitsu Microelectronics commercial macros to
be easily incorporated.
• Compiled cell (RAM, ROM, others)
• Support for ultra high speed (up to 10 Gbps) interface macros.
(Continued)
