DS541 (v3.0) August 5, 2015 www.xilinx.com
Product Specification 1
© Copyright 2006–2015 Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of Xilinx in the United
States and other countries. All other trademarks are the property of their respective owners.
—PRODUCT OBSOLETE / UNDER OBSOLESCENCE—
Features
• In-System Programmable PROM for Configuration of
Xilinx FPGAs
• Low-Power Advanced CMOS NOR FLASH Process
• Endurance of 20,000 Program/Erase Cycles
• Operation over Full Military Temperature Range
(–55°C to +125°C)
• IEEE Standard 1149.1/1532 Boundary-Scan (JTAG)
Support for Programming, Prototyping, and Testing
• JTAG Command Initiation of Standard FPGA
Configuration
• Cascadable for Storing Longer or Multiple Bitstreams
• Dedicated Boundary-Scan (JTAG) I/O Power Supply
(V
CCJ
)
• I/O Pins Compatible with Voltage Levels Ranging From
1.8V to 3.3V
• Design Support Using the Xilinx Alliance ISE™ and
Foundation ISE Series Software Packages
• XQF32P
• 1.8V Supply Voltage
• Serial or Parallel FPGA Configuration Interface
(upto33MHz)
• Available in Small-Footprint VOG48 Package
• Design Revision Technology Enables Storing and
Accessing Multiple Design Revisions for
Configuration
• Built-In Data Decompressor Compatible with Xilinx
Advanced Compression Technology
Description
This data sheet describes the defense-grade version of the Platform Flash series of in-system programmable configuration
PROMs. Available in 32 Megabit (Mbit) density, this PROM provides an easy-to-use, cost-effective, and reprogrammable
method for storing large Xilinx FPGA configuration bitstreams. The 32-Mbit PROM supports Master Serial, Slave Serial,
Master SelectMAP, and Slave SelectMAP FPGA configuration modes (Figure 1).
Defense Grade Platform Flash In-System
Programmable Configuration PROM
DS541 (v3.0) August 5, 2015 Product Specification
Table 1: Xilinx Defense Grade Platform Flash PROM Features
Device Density V
CCINT
V
CCO
Range V
CCJ
Range Packages
Program
In-system
via JTAG
Serial
Config.
Parallel
Config.
Design
Revisioning
Compression
XQF32P 32 Mbit 1.8V 1.8V – 3.3V 2.5V – 3.3V VOG48 ✓✓✓ ✓ ✓
X-Ref Target - Figure 1
Figure 1: XQF32P Platform Flash PROM Block Diagram
CLKOUT
CEO
DATA (D0)
(Serial/Parallel Mode)
D[1:7]
(Parallel Mode)
TCK
TMS
TDI
TDO
CLK CE EN_EXT_SEL OE/RESET BUSY
Data
Data
Address
REV_SEL [1:0]CF
Control
and
JTAG
Interface
Memory
OSC
Serial
or
Parallel
Interface
Decompressor
DS541_01_111706