Issue 4 - September 2006 1 www.zetex.com
© Zetex Semiconductors plc 2006
BSP75N
60V self-protected low-side Intellifet
TM
MOSFET switch
Summary
Continuous drain source voltage V
DS
=60V
On-state resistance 500m⍀
Maximum nominal load current
(a)
1.1A (V
IN
= 5V)
Minimum nominal load current
(c)
0.7A (V
IN
= 5V)
Clamping energy 550mJ
Ordering information
Device marking
BSP75N
Description
Self-protected low side MOSFET. Monolithic over temperature, over
current, over voltage (active clamp) and ESD protected logic level
functionality. Intended as a general purpose switch.
Features
• Short circuit protection with auto restart
• Over-voltage protection (active clamp)
• Thermal shutdown with auto restart
• Over-current protection
• Input protection (ESD)
• High continuous current rating
• Load dump protection (actively protects load)
• Logic level input
Note:
The tab is connected to the source pin and must
be electrically isolated from the drain pin.
Connection of significant copper to the drain pin
is recommended for best thermal performance.
Device Reel size
(inches)
Tape width
(mm)
Quantity per reel
BSP75NTA 7 12mm embossed 1000
SOT223
S
S
D
IN
