• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • AS1312-BWLT-50 PDF文件及第1页内容在线浏览

AS1312-BWLT-50

AS1312-BWLT-50首页预览图
型号: AS1312-BWLT-50
PDF文件:
  • AS1312-BWLT-50 PDF文件
  • AS1312-BWLT-50 PDF在线浏览
功能描述: Ul t ra Low Quiescent Cur rent , Hysteret ic DC-DC Step-Up Conver ter
PDF文件大小: 577.9 Kbytes
PDF页数: 共20页
制造商: AMSCO[ams AG]
制造商LOGO: AMSCO[ams AG] LOGO
制造商网址: http://www.ams.com
捡单宝AS1312-BWLT-50
PDF页面索引
120%
www.ams.com/DC-DC_Step-Up Revision 1.12 1 - 20
AS1312
Ultra Low Quie scent Current , Hy stereti c D C-DC Step-Up Conver ter
1 General Description
The AS1312 is an ultra low I
Q
hysteretic step-up DC-DC converter.
The AS1312 achieves an efficiency of up to 94% and is designed to
operate from a +0.7V to +5.0V supply, the output voltage is fixed in
50mV steps from +2.5V to 5.0V.
In order to save power the AS1312 features a shutdown mode,
where it draws less than 100nA. In shutdown mode the battery is not
connected to the output.
If the input voltage exceeds the output voltage the device is in a
feedthrough mode and the input is directly connected to the output
voltage.
In light load operation, the device enters a sleep mode when most of
the internal operating blocks are turned off in order to save power.
This mode is active approximately 50µs after a current pulse
provided that the output is in regulation.
The AS1312 also offers an adjustable low battery detection. If the
battery voltage decreases below a threshold defined by two external
resistors on pin LBI, the LBO output is pulled to logic low. LBO is
working as Power-OK when LBI is connected to GND.
The AS1312 is available in a 8-pin (2x2) TDFN and a 0.4mm pitch 8-
pin WL-CSP package.
Figure 1. AS1312 - Typical Application Diagram
2 Key Features
Input voltage range: 0.7V to 5.0V
Fixed output voltage range: 2.5V to 5.0V
Peak output current: 200mA
Quiescent current: 1µA
Shutdown current: < 100nA
Up to 94% efficiency
Output disconnect in shutdown
Feedthrough mode when V
IN
> V
OUT
Adjustable low battery detection or Power-OK output selectable
No external diode or transistor required
Over temperature protection
Packages:
- 8-pin (2x2) TDFN
- 8-pin WL-CSP with 0.4mm pitch
3 Applications
The AS1312 is an ideal solution for handheld devices and battery
powered products.
VIN
0.7V to 5.0V
AS1312
C2 = 10µF
C1 = 22µF
GND
VOUT
2.5V to 5.0V
EN
VIN
VOUT
LBO
LBI
On
Off
R1
R2
L1 = 6.8µH
LX
R3
Low Battery Detect
CREF = 100nF
REF
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价