1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com P0101_AE • 4/6/2016
One world. One KEMET
Benets
• Large generated force of 3,500 N/cm
2
• High-speed response: Driving up to about 1/3 of self-resonant
frequency (in several ten kHz)
• Low power consumption: Can be retained at the leakage
current state of 100 μA or less
• Very small size: 1/10 or smaller than conventional multilayer
actuators
• RoHS/REACH compliant
Overview
Multilayer piezoelectric actuators are ceramic elements used
to convert electrical energy into mechanical energy such as
displacement or force by utilizing the piezoelectric longitudinal effect.
KEMET’s multilayer piezoelectric actuators are produced based
on our unique element structure design and piezoelectric
ceramic materials with high electrostrictive factors. Compared to
conventional piezoelectric actuators, they are smaller in size but can
generate higher displacement and force at low voltages.
The Resin Coated AE series actuators feature compact size and a
wide variety of shapes for applications such as ultra-ne positioning
mechanism and drive sources.
Multilayer Piezoelectric Actuators
AE Series Resin Coated
Applications
Typical applications include positioning, auto focusing of optical systems, pumps, mass-ow valves, vibration source, vibration controls,
sensors, image stabilization of DSC, mirror/prism positioning, manipulators, motors and printers.
Ordering Information
AE 0505 D44 H40 D F
Series
Ceramic Cross
Section (mm)
Nominal Displacement
(µm)
Coating Type
AE = Resin Coated Type 0505 = 5 mm X 5 mm
(Coating area is not
included)
The last two digits specify
the displacement values.
Example: D44 = 44 μm
Blank = Standard overall
lengths of 5, 10 or 20
H40 = 40
D = Thin coating type F = RoHS/REACH
Compliant
(See “Environmental
Compliance” below)