DS05-20882-2E
FUJITSU SEMICONDUCTOR
DATA SHEET
FLASH MEMORY
CMOS
64M (4M
×
16) BIT
MBM29LV650UE/651UE
-90/12
■
■■
■
DESCRIPTION
The MBM29LV650UE/651UE is a 64M-bit, 3.0 V-only Flash memory organiz ed as 4M words of 16 bits each. The
device is designed to be programmed in system with the standard system 3.0 V V
CC supply. 12.0 V VPP and
5.0 V V
CC are not required for write or erase operations. The devices can also be reprogrammed in standard
EPROM pr ogrammers.
To eliminate bus contention the devices have separate chip enable (CE
), write enable (WE), and output enable
(OE
) controls.
The MBM29LV650UE/651UE is entirely command set compatible with JEDEC single-power-supply Flash stan-
dard. Commands are written to the command register using standard microprocessor write timings. Register
contents ser ve as input to an internal state-machine which controls the erase and progra mming circuitr y. Write
cycles also internally latch addresses and data needed for the programming and erase operations.
Typically, each sector can be programmed and verified in about 0.5 seconds.
(Continued)
■
■■
■
PRODUCT LINEUP
■
■■
■
PACKAGES
Part No. MBM29LV650UE/651UE
Ordering Part No.
V
CC = 3.3 V
90 —
V
CC = 3.0 V
—12
Max. Address Access Time (ns) 90 120
Max. CE
Access Time (ns) 90 120
Max. OE
Access Time (ns) 35 50
+0.3 V
–0.3 V
+0.6 V
–0.3 V
(FPT-48P-M20)
(FPT-48P-M19)
Marking Side
Marking Side
48-pin plastic TSOP (I)
