E
PRELIMINARY
Order Number: 290578-003
High Performance Read
80/120 ns Max Access Time
40 ns Max. Output Enable Time
Low Power Consumption
20 mA Typical Read Current
x8-Only Input/Output Architecture
Space-Constrained 8-bit
Applications
Optimized Array Blocking Architecture
One 16-KB Protected Boot Block
Two 8-KB Parameter Blocks
One 96-KB Main Block
One 128-KB Main Block
Top Boot Location
Hardware Data Protection Feature
Erase/Write Lockout during Power
Transitions
Absolute Hardware Protection for
Boot Block
Software EEPROM Emulation with
Parameter Blocks
Extended Cycling Capability
100,000 Block Erase Cycles
Automated Byte Write and Block Erase
Industry-Standard Command User
Interface
Status Registers
Erase Suspend Capability
SRAM-Compatible Write Interface
Reset/Deep Power-Down Input
0.2 µA I
CC
Typical
Provides Reset for Boot Operations
Industry-Standard Surface Mount
Packaging
40-Lead TSOP
44-Lead PSOP
40-Lead PDIP
ETOX™ IV Flash Technology
5V Read
12V Write and Block Erase
V
PP
= 12V ±5% Standard
V
PP
= 12V ±10% Option
Independent Software Vendor Support
Intel’s 2-Mbit flash memory is an extension of the Boot Block architecture which includes block-selective
erasure, automated write and erase operations, and a standard microprocessor interface. The 2-Mbit flash
memory enhances the Boot Block architecture by adding more density and blocks, x8 input/output control,
very high-speed, low-power, and industry-standard ROM-compatible pinout and surface mount packaging.
The Intel 28F002BC is an 8-bit wide flash memory offering. This high-density flash memory provides user-
selectable bus operation for 8-bit applications. The 28F002BC is a 2,097,152-bit nonvolatile memory
organized as 262,144 bytes of informat ion. It is of fered in 44-lead PSOP, 40- lead PDIP and 40-l ead TSOP
package, which is ideal for space-constrained portable systems or any application with board space
limitations.
This devi ce us es an int egrated Com mand Us er Int erfac e (CUI) and Writ e S tat e Machi ne (WS M) for si mpli fied
byte write and block erasure. The 28F002BC provides block locations compatible with Intel’s MCS®-186
family, 80286, 90860CA, and the Intel386™, Intel486™, Pentium®, and Pentium Pro microprocessors.
The boot block includes a data protection feature to protect the boot code in critical applications. With a
maximum access time of 80 ns, t his high-performanc e 2-Mbit flas h memory interf aces at zero wai t-state t o a
wide range of microprocessors and microcontrollers. A deep power-down mode lowers the total V
CC
power
consumption to 1 µW typical. This power savings is critical in hand-held battery powered systems. For very
low-power applicat ions us ing a 3.3V s upply, ref er to the Int el 28F002BV-T/ B
2-Mbit S martVolt age Boot Block
Flash Memory
datasheet. Manufac tured on Intel ’s 0.6 m icron ETOX ™ IV proc ess tec hnology, the 28F002BC
flash memory provides world-class quality, reliability, and cost-effectiveness at the 2-Mbit density.
28F002BC 2-MBIT (256K X 8)
BOOT BLOCK FLASH MEMORY
