Board 1 SKYPER 32PRO R
© by SEMIKRON Rev. 02 – 21.04.2010 1
SKYPER
®
Adaptor board
Adaptor board
Board 1 SKYPER 32PRO R
Preliminary Data
Features
• Two output channels
• Failure management
Typical Applications*
• Adaptor board for SKYPER 32 IGBT
drivers in bridge circuits for industrial
applications
• DC bus up to 1200V
Footnotes
All characteristics listed in the data sheet
are guilty for the use with SKYPER 32
Please consider the derating of the ambient
temperature
Please refer to the datasheet of SKYPER
32 for further information
This is an electrostatic discharge sensitive device (ESDS), international standard IEC
60747-1, Chapter IX
* The specifications of our components may not be considered as an assurance of component
characteristics. Components have to be tested for the respective application. Adjustments
may be necessary. The use of SEMIKRON products in life support appliances and systems is
subject to prior specification and written approval by SEMIKRON. We therefore strongly
recommend prior consultation of our personal.
Absolute Maximum Ratings
Symbol Conditions Values Unit
Vs Supply voltage primary 16 V
Iout
PEAK
Output peak current 15 A
Iout
AVmax
Output average current 50 mA
f
max
max. switching frequency 50 kHz
V
CE
Collector emitter voltage sense across
the IGBT
1700 V
V
isol IO
Isolation test voltage input - output
(AC, rms, 2s)
4000 V
V
isolPD
Partial discharge extinction voltage,
rms, Q
PD
! 10pC
1500 V
V
isol12
Isolation test voltage output 1 - output
2 (AC, rms, 2s)
1500 V
R
Gon min
1.5 "
R
Goff min
Minimum rating for external R
Goff
1.5 "
T
op
Operating temperature -25 ... 85 °C
T
stg
Storage temperature -25 ... 85 °C
Characteristics
Symbol Conditions min. typ. max. Unit
Vs Supply voltage primary side 14.4 15 15.6 V
V
j
input signal voltage on / off 15 / 0 V
V
IT+
Input treshold voltage HIGH 12.3 V
V
IT-
Input threshold voltage (LOW) 4.6 V
V
G(on)
Turn on gate voltage output 15 V
V
G(off)
Turn off gate voltage output -7 V
t
d(on)IO
Input-output turn-on propagation time 1.2 µs
t
d(off)IO
Input-output turn-off propagation time 1.2 µs
Derating
