1 of 2
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION
1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
Instruction Sheet
408-8640
13 AUG 15 Rev C
Type A for SMA Connectors
Type B for SMA Connectors
Type A for SMC Connectors
Type A for SSMA/OSSM* Connectors
Type A for SSMA/OSSM Connectors
Type A for SMB/SMC Connectors
Type A Kit (Includes 2 Heads)
Type B for OSMM Connectors
Figure 1
1. INTRODUCTION
The mini torque wrenches listed in Figure 1 are used to properly install or disassemble the described
connectors.
Figure 1 also lists the previous part numbers of the wrenches, description and size, and preset torque for each
wrench.
NOTE
All numerical values in this instruction sheet are in U.S. customary units. Dimensions are in metric units [with U.S. customary
units in brackets]. Figures and illustrations are for reference only and are not drawn to scale.
Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY.
2. DESCRIPTION
Each mini torque wrench consists of a protective cover, torque wrench, and a “fillister head” screw (which
permits replacement or change of various wrench heads).
Type A wrench is equipped with an open-end head, and Type B wrench is equipped with a partially- closed
socket head and extension arm. Refer to Figure 2 for head and extension arm replacement part numbers.
The wrenches are designed to be used in the clockwise or counterclockwise direction.
Partially Closed
Socket Head
