1 of 2
© 2014 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER
1-800-722-1111
PRODUCT INFORMATION
1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
Instruction Sheet
408-8676
27 OCT 14 Rev G
TE
CONNECTIVITY
PART NUMBER
For SMA (OSM) Type Connectors
For SMA (OSM) Hermetic Type Connectors
Production Torque Wrench Kit
For SC/N Type Connectors (Hex Nut Design)
For TNC Type Connectors (Hex Nut Design)
For TNC Type Connectors (Hex Nut Design)
Figure 1
1. INTRODUCTION
These production torque wrenches are used to properly install or disassemble the connectors listed in Figure 1.
Figure 1 also contains the TE part numbers for the wrenches, the previous part numbers for the wrenches,
wrench size, and the preset torque for each wrench.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets], unless otherwise noted.
Reason for revision is provided in Section 5, REVISION SUMMARY.
2. DESCRIPTION
Each production torque wrench contains a protective cover, a torque wrench, and an interchangeable head.
Refer to Figure 2 for the appropriate replacement wrench head part numbers.
The wrenches are designed to be used in the clockwise or counterclockwise direction.
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Production Torque Wrenches
