1.5KE SERIES
Voltage 6.8V ~ 440V
1500W Peak Power / 5.0W Steady State
1500W Peak Power TVS
Elektronische Bauelemente
06-Sep-2010 Rev. C Page 1 of 3
RoHS compliant
A suffix of "-C" specifies halogen & lead-free
FEATURES
1500 Watts Surge Capability at 1ms.
Excellent clamping capability.
Low zener impedance.
Fast response time：Typically less than
1.0ps from 0 volt to BV min.
Typical I
R
less than 1 A above 10 V
High temperature solde ring guaranteed：
260°C / 10 seconds / .375” (9.5mm) lead
length, 5lbs.(2.3kg) tension.
MECHANICAL DATA
Case:：Molded plastic.
Epoxy：UL 94V-0 rate flame retardant.
Lead：Axial leads, solderable per MIL -STD-202,
method 208 guaranteed.
Polarity：Color band denot es cathode end
Mounting position：Any
Weight：1.20 grams (Approximate)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz. resistive or inductive load.
For capacitive load, derate current by 20%.
CHARACTERISTIC SYMBOL VALUE UNITS
Peak Power Disipation at T
A
=25°C, T
P
=1ms
(1)
P
PK
Minimum 1500 W
Steady State Power Di ssipation at T
L
=75°C
Lead Length .375” (9.5mm )
(2)
P
D
6.5 W
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave superimposed on rated load
(JEDEC method)
(3)
I
FSM
200.0 A
Operating and Storage Temperature Range T
J,
T
STG
-55 to +150 °C
Notes:
1. Non-repetitive current pulse per Fig. 3 and derated above T
A
=25°C per Fig. 2.
2. Mounted on Copper Pad area of 0.8” X 0.8” (20mm X 20mm) per Fig. 5.
3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types 1.5KE6.8 thru 1.5KE440.
2. Electrical characteristics apply in both directions.
AC
B
AD
DO-201
REF.
Millimete
Min. Max.
A 27.2 27.8
B 7.40 7.60
C 4.40 4.60
D 1.15 1.25
