SPECIFICATIONS
Shielded coaxial cable lead
Shielded sensor
Low noise
Flexible
Multi-purpose
Piezo film Technology
The “S” in SDT stands for “Shielded Sensor.”
SDT1 Piezo Film Sensors consist of a rectangular
element of Piezo film together with a molded plastic
housing and 18” of coaxial cable. The film element, screen
printed with silver ink, is folded over on itself, providing
self-shielding of the transducer area. This is important in
applications in high EMI environments.
The SDT1 can be adhered to other surfaces using
double sided adhesives, epoxy or cyanoacrylate (super
glue). Care should be taken if the sensor is to be removed,
as the double-side adhesive can peel the metallization
from the film.
When adhered to a surface in this manner, the
SDT1 is an excellent contact microphone or dynamic
strain gage. The output from the SDT1 can input directly to
an oscilloscope (10 MΩ preferred input impedance) or a
signal analyzer.
FEATURES
Shielded piezo film sensor
High longitudinal strain coefficient
Integral coax cable
Wide frequency response
APPLICATIONS
Machine monitoring
Acoustic emission detection
Contact microphone
Vibration / impact sensing
Detecting machine tool chatter
Acoustic pickup
Vibration analysis for equipment and product design