SPECIFICATIONS
Low cost OEM signal conditioner
Very compact, open PC board design
Multiple unipolar and bipolar output options
DIP switch selectable gain and excitation
2.5, 5, 8 and 10kHz excitation frequencies
Zero and span adjustment potentiometers
Master/slave capability
Card-edge or barrier strip connections
Works with very low input impedance LVDTs and
RVDTs
The LVM-110 is a full-featured LVDT/RVDT signal conditioner that
offers excellent performance on a budget. Operating on either a ±12
or ±15VDC supply voltage, the LVM-110 delivers a full range of
selectable unipolar and bipolar, low noise DC voltage outputs.
Designed to be compatible with most LVDT and RVDT transducers,
the LVM-110 will operate with 5 and 6 electrical connection devices.
This versatility is due to the wide variety of selectable excitation
frequencies, and a generous excitation drive current of 20mA,
allowing operation with transducer input impedances as low as 150
Ohms. The master/slave function (DIP switch selectable) allows
synchronization of multiple conditioners to prevent beat frequencies
and cross talk between transducers. The need for phase correction
adjustment is eliminated thanks to demodulation synchronized to
the sum of the LVDT/RVDT outputs.
The LVM-110 is designed for easy installation, plugged into a
backplane-type connector, or with individual wires connected to the
screw terminal barrier strip. Measuring less than 2.5x2.5 inches, it
can be mounted or stacked using the permanently attached
threaded standoffs, or card-edge guides. All selectable operating
parameters are easily accessed via two DIP switches, simplifying
the gain, frequency and output setup procedure.