1
Fuseholder Blocks & Clips
FMS (250V)
www.schurter.com/pg02b
Fuses
Fuseholder Open Design, Holder for MSx 250, THT
250 VAC/DC · 6.3 A (UL/CSA)
Description
- Through hole mounting
Standards
- UL 4248-1 / UL 512
- CSA 4248-1 / no. 39
Approvals
- UL File Number: E39328
References
Weblinks
pdf, html, General Product Information, Approvals, RoHS, CHINA-RoHS,
e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check
Technical Data
Fuse-Link Microfuse 250 V
Mounting PCB
Terminal Solder THT
Rated Voltage 250 VAC/DC
Rated Current 6.3 A (UL/CSA)
Degree of Protection IP 30
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket Thermoplastic, UL 94V-0
Material: Terminals Tin-Plated Copper Alloy
Unit Weight (Socket/Cap) 0.37 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking ,
Soldering Methods Wave
Solderability 235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 1
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
Contact Resistance < 7 mΩ at 20 mV
Dielectric Strength > 3 kV between L-N
(50 Hz; 1 min)
Impulse Withstand Voltage > 4 kV between L-N
Insulation Resistance > 10 MΩ between L-N
(500 VDC; 1 min)
Overvoltage Category I - III acc. to IEC 60664-1
Pollution Degree 1 - 3 acc. to IEC 60664-1
Dimensions
7.6 mm
3
4.3
5.08
ø 9.5
ø 0.5
8.5
3.2
4.4
45˚
R 0.75
ø 1.4
ø 1
Variant 0031.7601
Drilling diagram
Variants
Holder Order Number
l
0031.7601
Packaging Unit
Plastic box (100 pcs.)
The specifications, descriptions and illustrations indicated in this document are based on
current information. All content is subject to modifications and amendments.
15.06.2012