1
Fuseholder Blocks & Clips
FME
www.schurter.com/pg02b
Fuses
Fuseholder Open Design, Holder for MSF 125, Panel Mount
125 VAC · 5 A (UL/CSA)
Description
- Panel mount, front side
Standards
- UL 512
- CSA C22.2 no. 39
Approvals
- UL File Number: E39328
References
General Product Information
Fuseholder to MSF 12
5
Weblinks
RoHS, CHINA-RoHS, e-Store, SCHURTER-Stock-Check, Distributor-
Stock-Check, CAD-Drawings, Accessories, Product Change Notification
(PCN), Product Content Sheet (PCS), White paper
Technical Data
Fuse-Link Microfuse 125 V
Mounting Panel Mount
Terminal Solder
Rated Voltage 125 VAC
Rated Current 5 A (UL/CSA)
Degree of Protection IP 40
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket Thermoset, black, UL 94V-0
Material: Terminals Silver-Plated Brass
Unit Weight (Socket/Cap) 0.3 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Approvals
Soldering Methods Iron
Solderability 350 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Contact Resistance < 5 mΩ at 20 mV
Dielectric Strength > 3 kV between L-N
(50 Hz; 1 min)
Impulse Withstand Voltage > 4 kV between L-N
Insulation Resistance > 10 MΩ between L-N
(500 VDC; 1 min)
Overvoltage Category I - III acc. to IEC 60664-1
Pollution Degree 1 - 3 acc. to IEC 60664-1
Abmessungen
11.5 mm
max. 3.2
ø 8.3
1.9x1.4
8.1
11.5
ø 4.7
ø 6.35
1.5
0
-0.1
4.8
4
+0.1
0
4.9
+0.1
0
+0.2
0
Drilling diagram
Variants
Holder Order Number
l
0031.7503
Packaging Unit
Plastic Bag (100 pcs.)
The specifications, descriptions and illustrations indicated in this document are based on
current information. All content is subject to modifications and amendments.