• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • 0-1413009-9 PDF文件及第1页内容在线浏览

0-1413009-9

0-1413009-9首页预览图
型号: 0-1413009-9
PDF文件:
  • 0-1413009-9 PDF文件
  • 0-1413009-9 PDF在线浏览
功能描述: Small power relay
PDF文件大小: 298.77 Kbytes
PDF页数: 共4页
制造商: TEC[TE Connectivity Ltd]
制造商LOGO: TEC[TE Connectivity Ltd] LOGO
制造商网址: http://www.te.com/usa-en/home.html
捡单宝0-1413009-9
PDF页面索引
120%
07-2017, Rev. 0717
www.te.com
© 2017 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Small power relay
Limiting continuous current 20A at 85°C
Minimal weight
Low noise operation
Wave (THT) and reflow (THR/pin-in-paste) solderable versions
For single version refer to Single Micro Relay K
Typical applications
Door lock, heated front/rear screen, lamps front/rear/fog light, interior
lights, seat control, sun roof, window lifter, wiper control.
Contact Data
Contact arrangement 2 form C, 2 CO
Rated voltage 10/12VDC
Rated current
1)
NO/NC
30A/25A
Limiting continuous current
1)
23°C 30/25A
85°C 20/15A
105°C 15/10A
Limiting making current 40A
2)
Limiting breaking current 30A
Contact material AgSnO
2
Min. contact load 1A at 5VDC
3)
Initial voltage drop at 10A, typ./max. 30/300 mV
Operate/release time typ. 3/1.5ms
4)
Electrical endurance
-40°C, +25°C, +85°C and 14 VDC,
form C (CO), cyclic temperature
motor reverse blocked, 25A, 0.77mH >1x10
5
ops.
wiper
25A make/5A break,
generator peak -20A on NC, L=1.0mH >1x10
6
ops.
form A contact (NO), cyclic temperature
resistive 20A >1x10
5
ops.
Contact Data (continued)
Mechanical endurance > 5x10
6
ops.
1) Measured on 70x70x1.5mm epoxy PCB FR4 with 25cm
2
(double layer 105μm)
copper area. Connecting cable cross section 6 mm
2
.Boundary conditions: 180°C coil
temperature;130°C solder joint. Only one relay energized.
2) The values apply to a resistive or inductive load with suitable spark suppression and at
maximum 13.5VDC for 12VDC load voltages. For a load current duration of maximum
3s for a make/break ratio of 1:10.
3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at
http://relays.te.com/appnotes/
4) Measured at nominal voltage without coil suppression unit. A low resistive suppression
device in parallel to the relay coil increases the release time and reducesthe lifetime
caused by increased erosion and/or higher risk of contact tack welding.
Coil Data
Rated coil voltage 12VDC
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
001 12 6.9 1.5 254 567
002 10 5.7 1.25 181 552
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Double Micro Relay K (THT – THR)
Automotive Relays
PCB Double Relays
Max. DC load breaking capacity
Load limit curve I: safe shutdown, arc extinguishes during transit time.
Load limit curve II: safe shutdown, no stationary arc.
Load limit curves measured with low inductive resistors verified for 1000 switching events.
0
50
100
150
200
250
300
-40-20 020406080100 120
Ambient temperature in °C
Umax
Uop (E=0V)
Does not take into account the temperature rise due to the contact current
E = pre-energization
086C/R2_fcw1b
10
100
0.11 10 100
Max. Switching Voltage in VDC
Switching Current in A
curve II
curve I
30 W
100 W
200 W
420 W
Coil operating range
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价